Manager class. More...

#include <ilviews/manager/manager.h>

Inheritance diagram for IlvManager:

Public Member Functions
	IlvManager (IlvDisplay *display, int layers=2, IlBoolean useacc=IlTrue, IlUShort maxInList=IlvMaxObjectsInList, IlUShort maxInNode=IlvMaxObjectsInList)
	Constructor. More...

virtual	~IlvManager ()
	Destructor. More...

IlvMgrView *	getView (const IlvView *v) const
	Returns the `IlvMrgView` of a manager view. More...

Applying Functions to Located Objects
void	applyInside (int layer, IlvApplyObject func, IlAny arg, const IlvRect &rect, const IlvTransformer *t=0, IlBoolean redraw=IlTrue)
	Applies a user function to objects of a layer located in a rectangle. More...

void	applyIntersects (int layer, IlvApplyObject func, IlAny arg, const IlvRect &rect, const IlvTransformer *t=0, IlBoolean redraw=IlTrue)
	Applies a user function to objects of a layer intersecting a rectangle. More...

void	applyInside (IlvApplyObject func, IlAny arg, const IlvRect &rect, const IlvTransformer *t=0, IlBoolean redraw=IlTrue)
	Applies a user function to graphic objects located in a rectangle. More...

void	applyIntersects (IlvApplyObject func, IlAny arg, const IlvRect &rect, const IlvTransformer *t=0, IlBoolean redraw=IlTrue)
	Applies a user function to graphic objects intersecting a rectangle. More...

Applying Functions to Objects
IlBoolean	isInApply () const
	Indicates if an `applyTo...()` method is being executed. More...

virtual void	applyToObjects (IlUInt count, IlvGraphic const objects, IlvApplyObject func, IlAny arg, IlBoolean redraw=IlTrue)
	Applies a user function to a set of graphic objects. More...

virtual void	applyToObjects (IlUInt count, IlvGraphic const objects, IlvApplyFunction func, IlAny arg, IlBoolean redraw=IlTrue)
	Applies a user function to a set of graphic objects. More...

virtual void	applyToObjects (int layer, IlvApplyObject func, IlAny arg, IlBoolean redraw=IlTrue)
	Applies a user function to all graphic objects of a manager layer. More...

virtual void	applyToObjects (int layer, IlvApplyFunction func, IlAny arg, IlBoolean redraw=IlTrue)
	Applies a user function to the graphic objects of a manager layer. More...

virtual void	applyToObject (IlvGraphic *object, IlvApplyObject func, IlAny arg, IlBoolean redraw=IlTrue)
	Applies a user function to a graphic object. More...

Associating an Interactor with an Object or View
virtual IlBoolean	dispatchToObjects (IlvEvent &, IlvView *)
	Dispatches an event to the appropriate graphic objects. More...

virtual IlBoolean	gadgetShortCut (IlvEvent &)
	Dispatches an event to the appropriate graphic objects. More...

IlvManagerObjectInteractor *	getObjectInteractor (const IlvGraphic *object) const
	The object interactor associated with a graphic object. More...

IlBoolean	setObjectInteractor (IlvGraphic object, IlvManagerObjectInteractor i)
	Sets an object interactor on a graphic object. More...

void	setInteractor (IlvManagerViewInteractor i, const IlvView view=0)
	Sets a view interactor on a manager view. More...

void	removeInteractor (const IlvView *view)
	Removes the view interactor from a manager view. More...

void	pushInteractor (IlvManagerViewInteractor *e)
	Dispatches an event to the appropriate graphic objects. More...

IlvManagerViewInteractor *	getInteractor (const IlvView *view) const
	Returns the view interactor associated with a manager view. More...

Callback Management
const IlAList *	getCallbackNames () const
	Registers a callback and its name. More...

IlvGraphicCallback	getCallback (const IlSymbol *cbName) const
	Registers a callback and its name. More...

void	registerCallback (const char *callbackName, IlvGraphicCallback callback)
	Registers a callback and its name. More...

void	unregisterCallback (const char *callbackName)
	Removes the callback function registered with the specified name from the callback list. More...

void	removeCallback (const char *callbackName)
	Registers a callback and its name. More...

virtual void	callCallbacks (const IlSymbol callbackName, IlvGraphic )
	Registers a callback and its name. More...

void	callCallback (IlvGraphic *object)
	Registers a callback and its name. More...

Cutting and Pasting
virtual char *	cut (IlUInt &count)
	Saves the selected graphic objects in a string and then deletes them. More...

virtual char *	copy (IlUInt &count)
	Saves all the selected graphic objects in a string. More...

virtual void	paste (const IlvView view, const char str, IlvPoint &location)
	Reads graphic objects from a string. More...

void	cutToClipboard ()
	Saves the selected graphic objects in the clipboard and deletes them. More...

void	copyToClipboard ()
	Saves the selected graphic objects in the clipboard. More...

void	pasteFromClipboard (const IlvView *view, IlvPoint &location)
	Reads graphic objects from the clipboard and adds them to the manager. More...

Draw, Redraw and Group Objects
virtual IlvGraphicSet *	group (IlUInt count, IlvGraphic const objects)
	Groups several graphic objects. More...

virtual void	unGroup (IlvGraphic *object, IlBoolean undoCommand=IlTrue)
	Ungroups the graphic objects of a graphic set. More...

void	installDrawHook (IlvManagerDrawHook *hook)
	Groups several graphic objects. More...

void	removeDrawHook (IlvManagerDrawHook *hook)
	Groups several graphic objects. More...

virtual void	eraseRegion (IlvView *view, const IlvRegion &region) const
	Erases a region of a manager view. More...

virtual void	draw (IlvView view, IlBoolean erase, const IlvRegion clip=0) const
	Draws the graphic objects of the manager in a manager view. More...

void	draw (IlvPort dst, const IlvTransformer t=0, const IlvRegion region=0, const IlvRegion clip=0) const
	Draws the contents of a manager in a destination port. More...

void	draw (int layer, IlvPort dst, const IlvTransformer t=0, const IlvRegion region=0, const IlvRegion clip=0) const
	Draws the contents of a manager layer in a destination port. More...

void	draw () const
	Draws the contents of the manager. More...

void	reDraw () const
	Erases all manager views and draws the contents of the manager. More...

void	reDraw (const IlvGraphic *object, IlBoolean erase=IlTrue) const
	Draws a graphic object in all manager views. More...

void	reDraw (IlUInt count, const IlvGraphic const objects, IlBoolean erase=IlTrue) const
	Draws a set of graphic objects in all manager views. More...

virtual void	viewResized (const IlvView *, IlvRect &)
	Groups several graphic objects. More...

void	bufferedDraw (IlvView *view, const IlvRect &rect) const
	Redraws a rectangular area of a manager view by means of a temporary pixmap. More...

void	bufferedDraw (IlvView *view, const IlvRegion &region) const
	Redraws a region of a manager view by means of a temporary pixmap. More...

void	bufferedDraw (IlvView view, const IlvGraphic object) const
	Draws a graphic object in a manager view by means of a temporary pixmap. More...

void	setClientData (IlAny data)
	Groups several graphic objects. More...

IlAny	getClientData () const
	Groups several graphic objects. More...

General Purpose Methods
const char *	getName () const
	Returns the name of the manager. More...

virtual void	setName (const char *name)
	Sets the name of the manager. More...

IlvDisplay *	getDisplay () const
	Returns the display. More...

IlvPalette *	getPalette () const
	Returns the manager palette. More...

IlBoolean	isModified () const
	Indicates whether the manager contents have been modified. More...

void	setModified (IlBoolean value)
	Sets the modification status of the manager. More...

IlUInt	getCardinal () const
	Returns the number of graphic objects. More...

virtual IlvGraphic const	getObjects (IlUInt &count) const
	Returns the graphic objects stored in the manager. More...

IlvGraphic const	objects (IlUInt &count) const
	Returns the name of the manager. More...

virtual IlvGraphic const	getObjects (int layer, IlUInt &count) const
	Returns the graphic objects stored in a manager layer. More...

virtual IlvGraphic *	lastContains (const IlvPoint &p, const IlvView *view) const
	Returns the graphic object containing a given point. More...

IlvGraphic *	lastContains (int layer, const IlvPoint &p, const IlvView *view) const
	Returns the graphic object containing a given point in a layer. More...

IlvGraphic *	filteredLastContains (const IlvPoint &p, const IlvView *view, const IlvGraphicFilter &f) const
	Returns the graphic object containing a given point. More...

IlvGraphic *	filteredLastContains (int layer, const IlvPoint &p, const IlvView *view, const IlvGraphicFilter &f) const
	Returns the graphic object containing a given point in a layer. More...

IlvGraphic const	allContains (const IlvPoint &p, const IlvView *view, IlUInt &count) const
	Returns all graphic objects containing a given point. More...

IlvGraphic const	allContains (int layer, const IlvPoint &p, const IlvView *view, IlUInt &count) const
	Returns all graphic objects containing a given point in a layer. More...

IlvGraphic *	firstIntersects (const IlvRegion &tr, const IlvTransformer *t) const
	Returns the first object intersecting a region. More...

IlvGraphic *	firstIntersects (const IlvRect &r)
	Returns the name of the manager. More...

IlvGraphic *	firstIntersects (int layer, const IlvRegion &tr, const IlvTransformer *t) const
	Returns the first object of a layer intersecting a region. More...

IlvGraphic const	allInside (IlUInt &count, const IlvRect &rect, const IlvTransformer *t=0) const
	Returns all graphic objects located in a rectangle. More...

IlvGraphic const	allIntersects (IlUInt &count, const IlvRect &rect, const IlvTransformer *t=0) const
	Returns all graphic objects intersecting a rectangle. More...

IlvGraphic const	allIntersects (int layer, IlUInt &count, const IlvRect &rect, const IlvTransformer *t=0) const
	Returns all graphic objects of a layer intersecting a rectangle. More...

IlvGraphic const	allInside (int layer, IlUInt &count, const IlvRect &rect, const IlvTransformer *t=0) const
	Returns all graphic objects of a layer located in a rectangle. More...

IlUInt	getCardinal (int layer) const
	Returns the number of graphic objects in a layer. More...

virtual void	contentsChanged ()
	Called automatically by the manager each time objects are created, removed, moved, or resized in the manager. More...

void	setCleanFunction (IlvApplyObject func)
	Sets a function to be called when an object is removed from the manager. More...

void	computeBBox (IlvRect &bbox, const IlvTransformer *t=0) const
	Computes the bounding box of all the objects stored in all the visible layers. More...

void	computeBBox (IlvRect &bbox, const IlvView *view) const
	Computes the bounding box of all the objects. More...

Grid Management
IlvManagerGrid *	getGrid (const IlvView *view) const
	Returns the manager grid associated with a manager view. More...

void	setGrid (IlvView const view, IlvManagerGrid grid)
	Sets a manager grid on a manager view. More...

void	snapToGrid (const IlvView *view, IlvPoint &p) const
	Moves a given point to the closest grid point on a manager view. More...

IlBoolean	transformThroughGrid (const IlvView *view, IlvPoint &p) const
	Transforms and moves a given point on a manager view to the closest grid point in the manager coordinate system. More...

Input and Output Methods
virtual IlvManagerInputFile *	createInputFile (istream &stream)
	Creates an `IlvManagerInputFile` from an input stream. More...

virtual IlvManagerInputFile *	createInputFile (ILVSTDPREF istream &stream)
	Creates an `IlvManagerInputFile` from an input stream. More...

virtual IlvManagerOutputFile *	createOutputFile (ostream &stream) const
	Creates an `IlvManagerOutputFile` from an output stream. More...

virtual IlvManagerOutputFile *	createOutputFile (ILVSTDPREF ostream &stream) const
	Creates an `IlvManagerInputFile` from an input stream. More...

virtual void	save (ostream &stream) const
	Saves all the graphic objects in an output stream. More...

virtual void	save (ILVSTDPREF ostream &stream) const
	Creates an `IlvManagerInputFile` from an input stream. More...

virtual void	read (istream &stream)
	Reads a set of graphic objects from the specified input stream. More...

virtual void	read (ILVSTDPREF istream &stream)
	Creates an `IlvManagerInputFile` from an input stream. More...

virtual void	read (const char *filename)
	Loads an Rogue Wave Views data file. More...

Managing Accelerators
virtual void	handleInput (IlvEvent &event, IlvView *view)
	Installs an event hook on the manager. More...

IlvManagerEventHook *	getEventHooks () const
	Installs an event hook on the manager. More...

IlBoolean	handleEventHooks (IlvEvent &event, IlvView *view)
	Installs an event hook on the manager. More...

IlBoolean	installEventHook (const IlvManagerEventHook *hook)
	Installs an event hook on the manager. More...

IlvManagerEventHook *	removeEventHook (const IlvManagerEventHook *hook)
	Removes and returns an event hook installed on the manager. More...

virtual IlBoolean	shortCut (IlvEvent &event, IlvView *view)
	Dispatches an incoming event to manager accelerators. More...

void	addAccelerator (IlvManagerAcceleratorAction f, IlvEventType type, IlUShort buttonOrKey=0, IlUShort modifiers=0, IlAny userArg=0, IlUShort optModifiers=0)
	Adds an accelerator to the manager. More...

void	removeAccelerator (IlvEventType type, IlUShort buttonOrKey=0, IlUShort modifiers=0)
	Removes the accelerator matching the event description. More...

IlBoolean	getAccelerator (IlvManagerAcceleratorAction f, IlAny userArg, IlvEventType type, IlUShort buttonOrKey=0, IlUShort modifiers=0)
	Gets an accelerator action matching an event description. More...

void	addAccelerator (IlvManagerAccelerator *)
	Installs an event hook on the manager. More...

void	removeAccelerator (IlvManagerAccelerator *)
	Installs an event hook on the manager. More...

IlvManagerAccelerator *	getAccelerator (IlvEventType type, IlUShort buttonOrKey=0, IlUShort modifiers=0)
	Installs an event hook on the manager. More...

void	removeAccelerators ()
	Removes all accelerators. More...

Managing Double Buffering
IlBoolean	setDoubleBuffering (const IlvView *view, IlBoolean useDB, IlBoolean tmp=IlFalse)
	Enables or disables double buffering for a manager view. More...

virtual void	setBackground (IlvView view, IlvColor color, IlvBitmap *bitmap=0)
	Sets the background of a manager view. More...

void	setDoubleBufferingColor (IlvColor *color)
	Enables or disables double buffering for a manager view. More...

IlBoolean	isDoubleBuffering (const IlvView *view) const
	Indicates whether double buffering is used for a manager view. More...

IlvManagerDblBufferHandler *	getDoubleBufferingHandler () const
	Enables or disables double buffering for a manager view. More...

void	setDoubleBufferingHandler (IlvManagerDblBufferHandler *)
	Enables or disables double buffering for a manager view. More...

IlvBitmap *	getDoubleBufferingBitmap (const IlvView *) const
	Enables or disables double buffering for a manager view. More...

Managing Object Layers
IlBoolean	isVisible (int layer) const
	Indicates whether a layer is considered visible by the manager. More...

void	setVisible (int layer, IlBoolean visible)
	Sets the visibility of a layer for the manager. More...

IlBoolean	isVisible (const IlvView *view, int layer) const
	Indicates the visibility of a layer in a manager view. More...

void	setVisible (const IlvView *view, int layer, IlBoolean visible)
	Sets the visibility of a layer for a manager view. More...

IlBoolean	isSelectable (int layer) const
	Indicates if a manager layer allows the selection of its graphic objects. More...

void	setSelectable (int layer, IlBoolean selectable)
	Enables or disables the selection of graphic objects in a manager layer. More...

virtual void	pop (IlvGraphic *object, IlBoolean redraw=IlTrue)
	Moves a graphic object higher in the drawing stacking order. More...

virtual void	push (IlvGraphic *object, IlBoolean redraw=IlTrue)
	Moves a graphic object lower in the drawing stacking order. More...

virtual void	moveLayer (int from, int to, IlBoolean redraw=IlTrue)
	Indicates whether a layer is considered visible by the manager. More...

IlvManagerLayer *	getManagerLayer (const char *layerName) const
	Indicates whether a layer is considered visible by the manager. More...

IlvManagerLayer *	getManagerLayer (const IlvGraphic *object) const
	Returns the `IlvManagerLayer` instance of a graphic object. More...

int	getLayer (const IlvGraphic *object) const
	Returns the manager layer containing a given graphic object. More...

void	setLayer (IlvGraphic *object, int layer, IlBoolean redraw=IlTrue)
	Moves a graphic object to a given manager layer. More...

int	getNumLayers () const
	Returns the number of manager layers. More...

void	setNumLayers (int numLayers)
	Sets the number of manager layers. More...

void	swapLayers (int layer1, int layer2, IlBoolean redraw=IlTrue)
	Swaps the contents of two manager layers. More...

void	addLayer (int position=-1, IlUShort maxInList=IlvMaxObjectsInList, IlUShort maxInNode=IlvMaxObjectsInList)
	Adds a layer to the manager. More...

void	removeLayer (int layer=-1)
	Removes a layer from the manager. More...

int	addLayer (IlvManagerLayer *layer, int position=-1)
	Adds a layer to the manager. More...

IlvManagerLayer *	removeLayer (IlvManagerLayer *)
	Indicates whether a layer is considered visible by the manager. More...

IlvManagerLayer *	replaceLayer (IlvManagerLayer *newLayer, int index)
	Indicates whether a layer is considered visible by the manager. More...

IlvManagerLayerFactory *	setManagerLayerFactory (IlvManagerLayerFactory *)
	Indicates whether a layer is considered visible by the manager. More...

IlvManagerLayer *	getManagerLayer (int i) const
	Returns the `IlvManagerLayer` instance from its index. More...

int	getLayerIndex (const IlvManagerLayer *) const
	Returns the index of a manager layer instance. More...

Managing Selections
IlvMakeSelection	setMakeSelection (IlvMakeSelection func)
	Sets the function that creates a selection object for a graphic object. More...

IlvManagerSelectionHook *	getSelectionHooks () const
	Sets the function that creates a selection object for a graphic object. More...

IlBoolean	installSelectionHook (const IlvManagerSelectionHook *hook)
	Sets a selection hook on the manager. More...

IlvManagerSelectionHook *	removeSelectionHook (const IlvManagerSelectionHook *hook)
	Removes the selection hook from the manager, if it is installed. More...

void	applyToSelections (IlvApplyObject func, IlAny arg, IlBoolean redraw=IlTrue)
	Applies a user function to the selected graphic objects. More...

IlUInt	numberOfSelections () const
	Returns the number of selected graphic objects. More...

virtual void	deSelectAll (IlBoolean redraw=IlTrue)
	Deselects the selected graphic objects. More...

virtual void	selectAll (IlBoolean redraw=IlTrue)
	Selects all the objects of the manager. More...

IlvGraphic const	getSelections (IlUInt &count) const
	Returns the selected graphic objects. More...

IlvDrawSelection *	getSelection (const IlvGraphic *object) const
	Returns the selection object of a graphic object. More...

IlvGraphic const	sortObjects (IlvGraphic const objs, IlUInt count) const
	Sorts a set of object. More...

virtual void	setSelected (IlvGraphic *object, IlBoolean selected=IlTrue, IlBoolean redraw=IlTrue)
	Selects or deselects a graphic object. More...

IlBoolean	isSelected (const IlvGraphic *obj) const
	Indicates if a graphic object is selected. More...

virtual void	duplicate (IlvPos dx=0, IlvPos dy=0)
	Duplicates the selected graphic objects. More...

virtual void	deleteSelections (IlBoolean redraw=IlTrue)
	Removes the selected objects from the manager and deletes them if undo is disabled. More...

Managing SmartSets
IlvSmartSet *	getSmartSet (const char *name) const
	Gets a smartset by its name. More...

virtual IlBoolean	addSmartSet (IlvSmartSet *set, IlBoolean redraw=IlTrue)
	Adds a smartset to the manager. More...

virtual IlBoolean	removeSmartSet (IlvSmartSet *set)
	Removes a smartset from the manager. More...

virtual IlvSmartSet *	duplicateSmartSet (IlvSmartSet *set, IlvPos dx=0, IlvPos dy=0)
	Makes a copy of a smartset. More...

Managing Undo
IlBoolean	isUndoEnabled () const
	Indicates whether the manager lets you undo commands. More...

void	setUndoEnabled (IlBoolean enable)
	Enables or disables the possibility of undoing commands in the manager. More...

void	forgetUndo ()
	Resets the undo command queue. More...

virtual void	repeat ()
	Executes again the last command.

virtual void	reDo (IlBoolean unused)
	Executes again the last canceled command. More...

virtual void	unDo ()
	Cancels the most recent command, leaving manager objects as they were before the previous command was applied.

virtual void	addCommand (IlvCommand *command)
	Appends a new command to the command queue. More...

IlvCommandHistory *	getCommandHistory () const
	Returns the object which handles the stack of commands. More...

Managing View Hooks
void	installViewHook (const IlvManagerViewHook *hook)
	Adds a view hook to the manager. More...

void	removeViewHook (const IlvManagerViewHook *hook)
	Removes a view hook from the manager. More...

IlvLink *	getViewHookList (const IlvView *view) const
	Adds a view hook to the manager. More...

IlvManagerViewHook const	getViewHooks (const IlvView *view, IlUInt &count) const
	Gets the view hooks of a manager view. More...

Manipulating Objects
virtual void	translateObject (IlvGraphic *object, IlvPos dx, IlvPos dy, IlBoolean redraw=IlTrue)
	Translates a graphic object. More...

void	moveObject (IlvGraphic *object, IlvPos x, IlvPos y, IlBoolean redraw=IlTrue)
	Moves a graphic object. More...

virtual void	reshapeObject (IlvGraphic *object, const IlvRect &bbox, IlBoolean redraw=IlTrue)
	Resizes a graphic object to fit in a rectangle. More...

Object Alignment
virtual void	align (IlvPosition alignment, IlBoolean redraw=IlTrue)
	Aligns the selected objects. More...

virtual void	makeColumn (IlvDim spacing=0, IlBoolean redraw=IlTrue)
	Arranges the selected graphic objects in a column. More...

virtual void	makeRow (IlvDim spacing=0, IlBoolean redraw=IlTrue)
	Arranges the selected graphic objects in a row. More...

virtual void	sameWidth (IlBoolean redraw=IlTrue)
	Resizes the selected graphic objects to the same width. More...

virtual void	sameHeight (IlBoolean redraw=IlTrue)
	Resizes the selected graphic objects to the same height. More...

Object Creation Interactors
IlvPalette *	getCreatorPalette () const
	Gets the default palette used to create graphic objects interactively. More...

void	setCreatorPalette (IlvPalette *palette)
	Sets the default palette used to create new graphic objects interactively. More...

int	getInsertionLayer () const
	Gets the default layer used to store the graphic objects created interactively. More...

void	setInsertionLayer (int layer=-1)
	Sets the layer where new objects created interactively using the predefined interactors will be stored. More...

Optimizing Drawing Tasks
void	initReDraws ()
	Initializes the manager so that calls to `IlvManager::invalidateRegion` can begin. More...

void	invalidateRegion (const IlvGraphic *object)
	Invalidates the bounding box of a graphic object. More...

void	invalidateRegion (const IlvRect &rect)
	Invalidates a rectangle. More...

void	invalidateRegion (const IlvView *view, const IlvRect &rect)
	Invalidates a rectangle in a manager view. More...

void	invalidateRegion (const IlvRegionUpdater &updater, const IlvGraphic *g=0)
	Updates the invalidated region. More...

void	addBefore (const IlvGraphic *g)
	Initializes the manager so that calls to `IlvManager::invalidateRegion` can begin. More...

void	addAfter (const IlvGraphic *g)
	Initializes the manager so that calls to `IlvManager::invalidateRegion` can begin. More...

void	reDrawViews (IlBoolean erase=IlTrue)
	Draws the invalidated regions. More...

void	abortReDraws ()
	Resets the invalidated regions. More...

virtual void	flushRedraw ()
	Performs the actual redraw of invalid regions. More...

void	disableRedrawTask ()
	Deactivates the lazy redraw mechanism. More...

IlvReDrawMode	getReDrawMode () const
	Returns the redraw mode of the manager. More...

void	setReDrawMode (IlvReDrawMode reDrawMode)
	Sets the redraw mode of the manager. More...

IlBoolean	isInvalidating () const
	Indicates whether the manager is in a phase of invalidating regions. More...

Tag Management
IlvGraphic const	getTaggedObjects (const IlSymbol *tag, IlUInt &count) const
	Returns the graphic objects associated with a given tag. More...

void	setTaggedObjectsSelected (const IlSymbol *tag, IlBoolean selected=IlTrue, IlBoolean redraw=IlTrue)
	Selects or deselects the graphic objects associated with a given tag. More...

void	removeTaggedObjects (const IlSymbol *tag, IlBoolean redraw=IlTrue)
	Removes graphic objects associated with a given tag. More...

void	applyToTaggedObjects (const IlSymbol *tag, IlvApplyObject func, IlAny arg, IlBoolean redraw=IlTrue)
	Applies a user function to all graphic objects associated with a given tag. More...

Binding Views to a Manager
virtual void	addView (IlvView *view)
	Adds a view to the manager. More...

virtual IlBoolean	removeView (IlvView *view)
	Removes a view from the manager view list. More...

IlvView **	getViews (IlUInt &count) const
	Returns the array of views associated with the manager. More...

IlvView *	getFirstView () const
	Returns the first view associated with the manager. More...

IlvTransformer *	getTransformer (const IlvView *view) const
	Returns the transformer associated with a manager view. More...

virtual void	setTransformer (const IlvView view, IlvTransformer t=0)
	Sets a transformer to a manager view. More...

virtual void	addTransformer (const IlvView view, IlvTransformer t=0)
	Composes a manager view transformer with another transformer. More...

void	translateView (const IlvView *view, IlvPos dx, IlvPos dy, IlBoolean redraw=IlTrue)
	Scroll the contents of a manager. More...

void	zoomView (const IlvView *view, const IlvPoint &point, IlFloat scalex, IlFloat scaley, IlBoolean redraw=IlTrue)
	Zoom the contents of a manager view. More...

void	rotateView (const IlvView *view, const IlvPoint &point, IlFloat angle, IlBoolean redraw=IlTrue)
	Rotates the contents of a manager view. More...

void	fitTransformerToContents (const IlvView *view, IlBoolean redraw=IlTrue, IlBoolean ratio=IlFalse)
	Rescales the contents of a manager view to fit in the view. More...

void	fitToContents (IlvView *view)
	Resizes a manager view to fit the bounding box of the graphic objects. More...

IlBoolean	isKeepingAspectRatio (const IlvView *view) const
	Indicates whether a manager view preserves the x/y ratio. More...

void	setKeepingAspectRatio (const IlvView *view, IlBoolean ratio=IlTrue, IlBoolean redraw=IlTrue) const
	Sets or unsets the automatic preservation of the x/y ratio in a manager view. More...

void	ensureVisible (IlvView *view, const IlvPoint &point)
	Translates the contents of a manager view in order to make a given location visible. More...

void	ensureVisible (IlvView *view, const IlvRect &rect)
	Translates the contents of a manager view in order to make a given rectangle visible. More...

void	allowEnsureVisible (IlBoolean v)
	Adds a view to the manager. More...

IlBoolean	allowEnsureVisible () const
	Adds a view to the manager. More...

static IlvManager *	Get (const IlvView *view)
	Returns the manager connected to the specified view, if any. More...

static void	Set (IlvView view, IlvManager manager)
	Adds a view to the manager. More...

Object Properties
virtual void	addObject (IlvGraphic *object, IlBoolean redraw=IlTrue, int layer=-1)
	Adds an object to the manager. More...

virtual void	addObject (const char name, IlvGraphic object, IlBoolean redraw=IlTrue, int layer=-1)
	Adds a graphic object to a manager, and then names the object. More...

virtual IlBoolean	removeObject (IlvGraphic *object, IlBoolean redraw=IlTrue, IlBoolean destroyIt=IlTrue)
	Removes a graphic object from the manager set. More...

IlvGraphic const	objects (int layer, IlUInt &count) const
	Adds an object to the manager. More...

IlvGraphic const	getPersistentObjects (IlUInt &count) const
	Adds an object to the manager. More...

IlvDrawSelection *	whichSelection (const IlvPoint &p, const IlvView *view) const
	Returns the selection object located at the given location. More...

IlvGraphic *	firstIntersects (int layer, const IlvRect &r)
	Adds an object to the manager. More...

IlBoolean	isVisible (const IlvGraphic *object) const
	Indicates whether a graphic object is visible. More...

IlBoolean	isVisible (const IlvGraphic g, IlvView view) const
	Indicates whether a graphic object is visible in a manager view. More...

void	setVisible (IlvGraphic *object, IlBoolean visible, IlBoolean redraw=IlFalse)
	Sets the visibility of a graphic object in the manager to visible. The method calls the `IlvManagerViewHook::contentsChanged` member function of the hook objects that are linked to the manager. This member function does not redraw the bounding box of the object. More...

const char *	getObjectName (const IlvGraphic *object) const
	Returns the name of a graphic object. More...

virtual IlBoolean	setObjectName (IlvGraphic object, const char name)
	Sets the name of a graphic object in the manager. More...

IlvGraphic *	getObject (const char *name) const
	Gets a graphic object by its name. More...

virtual IlBoolean	isSelectable (const IlvGraphic *obj) const
	Indicates if a graphic object can be selected. More...

virtual void	setSelectable (IlvGraphic *object, IlBoolean selectable)
	Sets a graphic object as selectable or not selectable. More...

IlBoolean	isMoveable (const IlvGraphic *object) const
	Indicates if a graphic object can be moved. More...

void	setMoveable (IlvGraphic *object, IlBoolean moveable)
	Sets the moveability of a graphic object. More...

IlBoolean	isResizeable (const IlvGraphic *object) const
	Indicates if a graphic object can be resized. More...

void	setResizeable (IlvGraphic *object, IlBoolean resizable)
	Sets a graphic object as resizable or not resizable. More...

IlBoolean	isEditable (const IlvGraphic *object) const
	Indicates whether a graphic object can be edited. More...

IlBoolean	isEditable (const IlvGraphic object, const IlvView ) const
	Adds an object to the manager. More...

IlvEditableFilter *	getEditableFilter () const
	Adds an object to the manager. More...

IlvEditableFilter *	setEditableFilter (IlvEditableFilter *)
	Adds an object to the manager. More...

void	setEditable (IlvGraphic *object, IlBoolean editable)
	Indicates whether a graphic object can be edited. More...

IlBoolean	isManaged (const IlvGraphic *object) const
	Indicates whether a graphic object is stored by the manager. More...

IlBoolean	isASelection (const IlvGraphic *object) const
	Indicates if a graphic object is a selection object. More...

virtual void	deleteAll (IlBoolean destroy, IlBoolean redraw)
	Removes all the graphic objects from the manager. More...

virtual void	deleteAll (int layer, IlBoolean destroy, IlBoolean redraw)
	Removes all the objects stored in a specified layer of the manager. More...

virtual void	installAccelerators ()
	Adds an object to the manager. More...

static IlvManager *	getManager (const IlvGraphic *object)
	Gets the manager holding a given graphic object. More...

Detailed Description

Manager class.

Library: ilvmgr

An IlvManager holds and manages a set of graphic objects. These objects can appear in superimposed layers. The display can take place in one or several views of the IlvView class. A graphic transformation can be associated with each view. Consequently, you can display any portion of the total space in which your graphic objects are located, with appropriate scales for each view.
The manager can associate an IlvManagerViewInteractor object for each view, an object which processes events intended for that particular view. If the manager has not associated an interactor object with a view, each event is handled by the interactor object associated with the graphic object that received the event. The interactor object belongs to the IlvManagerObjectInteractor class.
In certain situations, the best solution is to establish a generic action for all the objects associated with a single event sequence. For example, double clicking an object pops up an additional information panel. To do this, Rogue Wave Views allows you to associate direct actions with events. These actions, which are neither bound to the view nor to the object that was clicked on, are called accelerators.
The IlvManager class has been designed to allow a large number of graphic objects to be handled. In such cases, storing objects in a linear list or an array may cause some performance problems when objects must be retrieved from their location (refresh, selection, and so on). Most of the time, the manager stores the graphic object in a complex structure organized according to the geometry of the objects, so that they can by found quickly. Because this structure must always be kept synchronized with the state of the objects, the manager must always be informed when the geometry of an object is modified. This is why operations on graphic object (such as move, resize, rotate, and so on) must not be done by direct calls to graphic object member functions but must be done through the control of the manager. This is done by using IlvManager member functions called applyTo...(). These functions encapsulate a user function and allow the manager to keep its data structure coherent.
IlvManager also handles many utility functions for the views and objects under its control.
In the following member function descriptions, the term invalidated region means a region of the screen that needs to be updated.

See Also: IlvApplyObject, IlvContainer, IlvGadgetManager, IlvGetContentsChangedUpdate, IlvGetOptimizeMode, IlvGrapher, IlvIndexedSet, IlvManagerAccelerator, IlvManagerAcceleratorAction, IlvManagerCommand, IlvManagerEventHook, IlvManagerGrid, IlvManagerLayer, IlvManagerSelectionHook, IlvManagerViewHook, IlvManagerObjectInteractor, IlvManagerObserver, IlvManagerViewInteractor, IlvManagerInputFile, IlvManagerOutputFile, IlvMgrView, IlvSetContentsChangedUpdate, IlvSetOptimizeMode.

Constructor & Destructor Documentation

IlvManager::IlvManager	(	IlvDisplay *	display,
		int	layers = `2`,
		IlBoolean	useacc = `IlTrue`,
		IlUShort	maxInList = `IlvMaxObjectsInList`,
		IlUShort	maxInNode = `IlvMaxObjectsInList`
	)

Constructor.

Initializes an instance of IlvManager.

Parameters

display	The display. The manager uses this display to create graphic resources such as a palette to draw ghost images.
layers	The number of layers in the manager. If the application runs short of layers, the number of layers can be dynamically increased.
useacc	Indicates whether to install the default accelerators. See the list of accelerators in this class description.
maxInList	Specifies how objects are stored in a layer of this manager. There are two cases: objects are stored in a simple list, or, objects are stored in a more complex structure where linear access to objects is not possible. The maxInList parameter specifies the maximum number of objects that can be stored in the list. If you try to handle more objects than the number specified, the manager automatically switches to the more complex mode.
maxInNode	The maximum number of objects allowed in the node of a quadtree, before the node is divided into subtrees.

virtual IlvManager::~IlvManager ( )

virtual

Destructor.

Destroys all objects maintained by the manager as well as the manager itself. The destructor performs the following actions successively:

Abort all view interactors, by calling the abort member function on all view interactors that are installed, and then remove all interactors. The interactors themselves are not destroyed.
Remove and delete all installed selection hooks.
Remove and delete all installed event hooks.
Detach all views from the manager. The views themselves are not deleted.
Delete all the objects in all the layers.

Member Function Documentation

void IlvManager::abortReDraws ( )

Resets the invalidated regions.

Aborts the current update region. You can call this function when you discover, in your update algorithm, that it is necessary to reset every region currently stored as "to be updated" (you need to refresh the whole screen, for example). This function resets the update region to empty.

void IlvManager::addAccelerator	(	IlvManagerAcceleratorAction	f,
		IlvEventType	type,
		IlUShort	buttonOrKey = `0`,
		IlUShort	modifiers = `0`,
		IlAny	userArg = `0`,
		IlUShort	optModifiers = `0`
	)

Adds an accelerator to the manager.

Creates an IlvManagerAccelerator using the same arguments and adds it to the manager. If the accelerator already matches an action in the manager accelerator watch list (see IlvAccelerator::match), the action in the list is replaced by the action described in the function parameters. Accelerator actions are called by the IlvManager::shortCut method, which uses IlvAccelerator::trigger to check whether an accelerator must be activated.

Parameters

f	The user function used as accelerator action.
type	The accelerator event type.
buttonOrKey	The accelerator event data.
modifiers	The accelerator mandatory event modifiers.
userArg	The accelerator action user argument.
optModifiers	The accelerator optional event modifiers.

void IlvManager::addAccelerator ( IlvManagerAccelerator * )

Installs an event hook on the manager.

The last event hook installed is the first to be called when an event occurs.

Returns: IlTrue on success. If the hook is already installed on a manager, this member function does nothing and returns IlFalse.

Parameters

hook	The event hook.

void IlvManager::addAfter ( const IlvGraphic * g )

Initializes the manager so that calls to IlvManager::invalidateRegion can begin.

Called to initialize the manager before a series of calls to the member function IlvManager::invalidateRegion begin. It empties the update region for every managed view. Calls to IlvManager::initReDraws can be embedded so that the actual refresh only takes place when the last call to IlvManager::reDrawViews is reached.

void IlvManager::addBefore ( const IlvGraphic * g )

Initializes the manager so that calls to IlvManager::invalidateRegion can begin.

Called to initialize the manager before a series of calls to the member function IlvManager::invalidateRegion begin. It empties the update region for every managed view. Calls to IlvManager::initReDraws can be embedded so that the actual refresh only takes place when the last call to IlvManager::reDrawViews is reached.

virtual void IlvManager::addCommand ( IlvCommand * command )

virtual

Appends a new command to the command queue.

Parameters

command The command.

void IlvManager::addLayer	(	int	position = `-1`,
		IlUShort	maxInList = `IlvMaxObjectsInList`,
		IlUShort	maxInNode = `IlvMaxObjectsInList`
	)

Adds a layer to the manager.

Parameters

position	Indicates the layer index where this new layer is inserted. Any invalid value (such as `-1` or a number greater than the number of layers) indicates that you want to create a new layer on top of all the others.
maxInList	Indicates the maximum number of graphic objects the layer can store.
maxInNode	Not documented.

int IlvManager::addLayer	(	IlvManagerLayer *	layer,
		int	position = `-1`
	)

Adds a layer to the manager.

This method allows you to add instances of IlvManagerLayer subclasses.

Parameters

layer	Specifies a pointer to a layer object.
position	Indicates the layer index where this new layer is inserted. Any invalid value (such as `-1` or a number greater than the number of layers) indicates that you want to create a new layer on top of all the others.

virtual void IlvManager::addObject	(	IlvGraphic *	object,
		IlBoolean	redraw = `IlTrue`,
		int	layer = `-1`
	)

virtual

Adds an object to the manager.

If an object is inserted in a non-existent layer, the layer, as well as any intermediate ones, are automatically created. For example, by default, a manager is created with three layers (0, 1 and 2); the code

addObject(obj, IlTrue, 5);

creates layers 3, 4, and 5. An object cannot be added to a manager more than once.

Parameters

object	The graphic object.
redraw	Indicates whether the manager must immediately display the object.
layer	Specifies the layer index where the object must be inserted. The default value `-1` indicates that the object is stored in the last (topmost) layer.

Warning: [note] You can accelerate the process of storing and removing objects to and from the manager. When you call IlvManager::addObject or IlvManager::removeObject, tests ensure that the data structure remains consistent. These tests ensure that an object is not stored twice, or remove an object that is not stored in this manager. You can bypass these tests and accelerate the process of storing and removing objects in a manager. See the global functions IlvGetOptimizeMode and IlvSetOptimizeMode.

Reimplemented in IlvGadgetManager.

virtual void IlvManager::addObject	(	const char *	name,
		IlvGraphic *	object,
		IlBoolean	redraw = `IlTrue`,
		int	layer = `-1`
	)

virtual

Adds a graphic object to a manager, and then names the object.

This function is equivalent to

addObject(object, redraw, layer);

setObjectName(object, name);

If the object has a name that is already in use in the manager, the name is removed from the object. For more information, see the description of the IlvManager::addObject member function.

Parameters

name	Specifies the name to set on the object.
object	The graphic object.
redraw	Indicates whether the manager must immediately display the object.
layer	Specifies the layer index where the object must be inserted. The default value `-1` indicates that the object is stored in the last (topmost) layer.

Warning: [note] See "Note" under the first IlvManager::addObject member function.

Reimplemented in IlvGadgetManager.

virtual IlBoolean IlvManager::addSmartSet	(	IlvSmartSet *	set,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Adds a smartset to the manager.

This set must have a name. If there is already a smartset with the same name in the manager, the smartset set is renamed by adding 1 at the end of its name, or by incrementing the decimal value at the end of the name. If the smartset contains objects that are not stored in this manager, they are added to the manager.

Parameters

set	The smartset.
redraw	Specifies whether the manager must redraw its contents.

Returns: IlFalse on error, that is, if the smartset contains objects located in another manager.

virtual void IlvManager::addTransformer	(	const IlvView *	view,
		IlvTransformer *	t = `0`
	)

virtual

Composes a manager view transformer with another transformer.

Computes the product of the manager view transformer and t and sets the result on the view. The transformer is internally copied during this function call.

Parameters

view	The manager view.
t	The transformer.

virtual void IlvManager::addView ( IlvView * view )

virtual

Adds a view to the manager.

Attaches a new view to the manager. All events are then handled by the hierarchy of interactors located in the manager.

Parameters

view The view.

Reimplemented in IlvGadgetManager.

virtual void IlvManager::align	(	IlvPosition	alignment,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Aligns the selected objects.

Moves all selected objects to the given alignment parameter. The objects are aligned with the first selected object.

Parameters

alignment	Can take one of the following values: `IlvLeft IlvRight IlvTop IlvBottom IlvCenter IlvHorizontalCenter IlvVerticalCenter`.
redraw	Specifies whether the manager must redraw the invalidated regions occupied by the objects.

IlvGraphic* const* IlvManager::allContains	(	const IlvPoint &	p,
		const IlvView *	view,
		IlUInt &	count
	)		const

Returns all graphic objects containing a given point.

Parameters

p	Specifies the point in the view coordinate system.
view	The manager view.
count	Used to return the number of objects in the array.

Returns: An array of pointers to the objects at the given location in the view. The method takes into account the stack of layers where objects can be stored. The returned array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

IlvGraphic* const* IlvManager::allContains	(	int	layer,
		const IlvPoint &	p,
		const IlvView *	view,
		IlUInt &	count
	)		const

Returns all graphic objects containing a given point in a layer.

Parameters

layer	The index of the manager layer.
p	Specifies the point in the view coordinate system.
view	The manager view.
count	Used to return the number of objects in the array.

Returns: An array of pointers to the objects of the manager layer at the given location in the view. The method takes into account the stack of layers where objects can be stored. The returned array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

IlvGraphic* const* IlvManager::allInside	(	IlUInt &	count,
		const IlvRect &	rect,
		const IlvTransformer *	t = `0`
	)		const

Returns all graphic objects located in a rectangle.

Parameters

count	Used to return the number of objects in the array.
rect	The rectangle.
t	The transformer.

Returns: An array of pointers to every object whose bounding box is located inside the specified rectangle (possibly transformed), regardless of whether the objects or layers in which they are stored are visible. If a transformer is specified, the method tests the intersection between the rectangle and the bounding box of the transformed object. The returned array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

IlvGraphic* const* IlvManager::allInside	(	int	layer,
		IlUInt &	count,
		const IlvRect &	rect,
		const IlvTransformer *	t = `0`
	)		const

Returns all graphic objects of a layer located in a rectangle.

Parameters

layer	The index of the manager layer.
count	Used to return the number of objects in the array.
rect	The rectangle.
t	The transformer.

Returns: An array of pointers to every object stored in the layer and whose bounding box is located inside the rectangle (possibly transformed), regardless of whether the objects or layers in which they are stored are visible. If a transformer is specified, the method tests the intersection between the rectangle and the bounding box of the transformed object. The returned array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

IlvGraphic* const* IlvManager::allIntersects	(	IlUInt &	count,
		const IlvRect &	rect,
		const IlvTransformer *	t = `0`
	)		const

Returns all graphic objects intersecting a rectangle.

Parameters

count	Used to return the number of objects in the array.
rect	The rectangle.
t	The transformer.

Returns: An array of pointers to every object whose bounding box intersects the rectangle (possibly transformed), regardless of whether the objects or layers in which they are stored are visible. If a transformer is specified, the method tests the intersection between the rectangle and the bounding box of the transformed object. The returned array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

IlvGraphic* const* IlvManager::allIntersects	(	int	layer,
		IlUInt &	count,
		const IlvRect &	rect,
		const IlvTransformer *	t = `0`
	)		const

Returns all graphic objects of a layer intersecting a rectangle.

Parameters

layer	The index of the manager layer.
count	Used to return the number of objects in the array.
rect	The rectangle. If a transformer is specified, the method tests the intersection between the rectangle and the bounding box of the transformed object.
t	The transformer.

Returns: An array of pointers to every object stored in the layer and whose bounding box intersects the rectangle (possibly transformed), whether or not the objects or layers in which they are stored are visible. If a transformer is specified, the method tests the intersection between the rectangle and the transformed bounding box. The array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

void IlvManager::allowEnsureVisible ( IlBoolean v )

Adds a view to the manager.

Attaches a new view to the manager. All events are then handled by the hierarchy of interactors located in the manager.

Parameters

view The view.

IlBoolean IlvManager::allowEnsureVisible ( ) const

Adds a view to the manager.

Attaches a new view to the manager. All events are then handled by the hierarchy of interactors located in the manager.

Parameters

view The view.

void IlvManager::applyInside	(	int	layer,
		IlvApplyObject	func,
		IlAny	arg,
		const IlvRect &	rect,
		const IlvTransformer *	t = `0`,
		IlBoolean	redraw = `IlTrue`
	)

Applies a user function to objects of a layer located in a rectangle.

Encapsulates a call to func(object, arg) for each graphic object of a layer whose bounding box is included in the specified rectangle. If a transformer is specified, the method tests the bounding box of the transformed objects.

Parameters

layer	The index of the manager layer.
func	The user function to apply.
arg	The user argument.
rect	The rectangle.
t	The transformer.
redraw	Specifies whether the manager must redraw the invalidated regions. The invalidated regions are the areas occupied by the objects before and after the calls to the user function.

void IlvManager::applyInside	(	IlvApplyObject	func,
		IlAny	arg,
		const IlvRect &	rect,
		const IlvTransformer *	t = `0`,
		IlBoolean	redraw = `IlTrue`
	)

Applies a user function to graphic objects located in a rectangle.

Encapsulates a call to func(object, arg) for each graphic object whose bounding box is included in the specified rectangle. If a transformer is specified, the method tests the bounding box of the transformed objects.

Parameters

func	The user function to apply.
arg	The user argument.
rect	The rectangle.
t	The transformer.
redraw	Specifies whether the manager must redraw the invalidated regions. The invalidated regions are the areas occupied by the objects before and after the calls to the user function.

void IlvManager::applyIntersects	(	int	layer,
		IlvApplyObject	func,
		IlAny	arg,
		const IlvRect &	rect,
		const IlvTransformer *	t = `0`,
		IlBoolean	redraw = `IlTrue`
	)

Applies a user function to objects of a layer intersecting a rectangle.

Encapsulates a call to func(object, arg) for each graphic object of a layer whose bounding box intersects the specified rectangle. If a transformer is specified, the method tests the bounding box of the transformed objects.

Parameters

layer	The index of the manager layer.
func	The user function to apply.
arg	The user argument.
rect	The rectangle.
t	The transformer.
redraw	Specifies whether the manager must redraw the invalidated regions. The invalidated regions are the areas occupied by the objects before and after the calls to the user function.

void IlvManager::applyIntersects	(	IlvApplyObject	func,
		IlAny	arg,
		const IlvRect &	rect,
		const IlvTransformer *	t = `0`,
		IlBoolean	redraw = `IlTrue`
	)

Applies a user function to graphic objects intersecting a rectangle.

Encapsulates a call to func(object, arg) for each graphic object whose bounding box intersects the specified rectangle. If a transformer is specified, the method tests the bounding box of the transformed objects.

Parameters

func	The user function to apply.
arg	The user argument.
rect	The rectangle.
t	The transformer.
redraw	Specifies whether the manager must redraw the invalidated regions. The invalidated regions are the areas occupied by the objects before and after the calls to the user function.

virtual void IlvManager::applyToObject	(	IlvGraphic *	object,
		IlvApplyObject	func,
		IlAny	arg,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Applies a user function to a graphic object.

Encapsulates a call to func(object, arg). This member function ensures the stability of the internal structures of the manager. It removes the object from the quadtree, calls the user function, and then replaces the object. This allows the location to be modified without damaging the quadtree. To apply the same type of function to more objects, use one of the following IlvManager::applyToObjects functions:

Parameters

object	The graphic object.
func	The user function to apply.
arg	The user argument.
redraw	Specifies whether the manager must redraw the invalidated regions. The invalidated regions are the areas occupied by the objects before and after the calls to func.

Warning: [note] For all the applyTo...() member functions in this section, you must not select or remove an object within an applicative function, and calls to applyTo...() member functions should not be nested. Furthermore, when using these functions, you must not move an object from one layer to another.

virtual void IlvManager::applyToObjects	(	IlUInt	count,
		IlvGraphic const	objects,
		IlvApplyObject	func,
		IlAny	arg,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Applies a user function to a set of graphic objects.

Calls IlvManager::applyToObject for each graphic object of the specified array.

Parameters

count	The number of graphic objects in the array.
objects	The array of graphic objects.
func	The user function to apply.
arg	The user argument.
redraw	Specifies whether the manager must redraw the invalidated regions. The invalidated regions are the areas occupied by the objects before and after the calls to the user function.

virtual void IlvManager::applyToObjects	(	IlUInt	count,
		IlvGraphic const	objects,
		IlvApplyFunction	func,
		IlAny	arg,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Applies a user function to a set of graphic objects.

Encapsulates a call to func(arg) for each object in the specified array. The only difference with the other member function IlvManager::applyToObjects(count, objects, func, arg, redraw) is the user function prototype. In this member functionx, the user function takes only one parameter: the user argument. func is called count times; once per object in the array.

Parameters

count	The number of graphic objects in the array.
objects	The array of graphic objects.
func	The user function to apply.
arg	The user argument.
redraw	Specifies whether the manager must redraw the invalidated regions. The invalidated regions are the areas occupied by the objects before and after the calls to the user function.

virtual void IlvManager::applyToObjects	(	int	layer,
		IlvApplyObject	func,
		IlAny	arg,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Applies a user function to all graphic objects of a manager layer.

Calls IlvManager::applyToObject for each graphic object of the specified manager layer.

Parameters

layer	The index of the manager layer.
func	The user function to apply.
arg	The user argument.
redraw	Specifies whether the manager must redraw the invalidated regions. The invalidated regions are the areas occupied by the objects before and after the calls to the user function.

virtual void IlvManager::applyToObjects	(	int	layer,
		IlvApplyFunction	func,
		IlAny	arg,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Applies a user function to the graphic objects of a manager layer.

Encapsulates a call to func(arg) for the specified manager layer. All the graphic objects stored in the layer are removed from the manager. Then func is called and the objects are inserted back in the layer. The difference with the other member function IlvManager::applyToObjects(layer, func, arg, redraw) is that the user function is called only once, and its prototype has only one parameter, the user argument.

Parameters

layer	The index of the manager layer.
func	The user function to apply.
arg	The user argument.
redraw	Specifies whether the manager must redraw the invalidated regions. The invalidated regions are the areas occupied by the objects before and after the calls to the user function.

void IlvManager::applyToSelections	(	IlvApplyObject	func,
		IlAny	arg,
		IlBoolean	redraw = `IlTrue`
	)

Applies a user function to the selected graphic objects.

Encapsulates a call to func(object, arg) for each selected graphic object.

Parameters

func	The user function to apply.
arg	The user argument.
redraw	Specifies whether the manager must redraw the invalidated regions. The invalidated regions are the areas occupied by the objects before and after the calls to the user function.

void IlvManager::applyToTaggedObjects	(	const IlSymbol *	tag,
		IlvApplyObject	func,
		IlAny	arg,
		IlBoolean	redraw = `IlTrue`
	)

Applies a user function to all graphic objects associated with a given tag.

Encapsulates a call to func(object, arg) for each graphic object associated with the specified tag.

Parameters

tag	Specifies a tag.
func	The user function to apply.
arg	The user argument.
redraw	Specifies whether the manager must redraw the invalidated regions. The invalidated regions are the areas occupied by the objects before and after the calls to the user function.

Warning: [note] For all the applyTo...() member functions, do not select or remove an object within an applicative function, and do not nest calls to applyTo...() member functions. Furthermore, when using these functions, you must not move an object from one layer to another.

void IlvManager::bufferedDraw	(	IlvView *	view,
		const IlvRect &	rect
	)		const

Redraws a rectangular area of a manager view by means of a temporary pixmap.

Redraws a rectangular area of a manager view using a technique similar to double buffering: the drawings are done in a hidden pixmap, and then the pixmap is displayed in the manager view immediately. Unlike true double buffering, the pixmap is temporary and has the size of the rectangle, not the whole view.

Parameters

view	The manager view.
rect	The rectangle in the manager view coordinate system.

void IlvManager::bufferedDraw	(	IlvView *	view,
		const IlvRegion &	region
	)		const

Redraws a region of a manager view by means of a temporary pixmap.

Redraws a region of a manager view using a technique similar to double buffering: the drawings are done in a hidden pixmap, and then the pixmap is displayed in the manager view immediately. Unlike true double buffering, the pixmap is temporary and has the size of the bounding box of the region, not the whole view.

Parameters

view	The manager view.
region	The region in the manager view coordinate system.

void IlvManager::bufferedDraw	(	IlvView *	view,
		const IlvGraphic *	object
	)		const

Draws a graphic object in a manager view by means of a temporary pixmap.

Draws a graphic object in a manager view using a technique similar to double-buffering: the drawings are done in a hidden pixmap, then the pixmap is displayed in the manager view at once. Unlike with true double-buffering, the pixmap is temporary and has the size of the object bounding box, not the whole view.

Parameters

view	The manager view.
object	The graphic object.

void IlvManager::callCallback ( IlvGraphic * object )

Registers a callback and its name.

Associates the user callback function with a string that will be used as its name. This string will be registered using the IlSymbol class.

Parameters

callbackName	The character string.
callback	The user function.

virtual void IlvManager::callCallbacks	(	const IlSymbol *	callbackName,
		IlvGraphic *
	)

virtual

Registers a callback and its name.

Associates the user callback function with a string that will be used as its name. This string will be registered using the IlSymbol class.

Parameters

callbackName	The character string.
callback	The user function.

void IlvManager::computeBBox	(	IlvRect &	bbox,
		const IlvTransformer *	t = `0`
	)		const

Computes the bounding box of all the objects stored in all the visible layers.

If a transformer is specified, the returned rectangle is the bounding box of the transformed objects.

Parameters

bbox	Used to return the bounding box.
t	The transformer.

void IlvManager::computeBBox	(	IlvRect &	bbox,
		const IlvView *	view
	)		const

Computes the bounding box of all the objects.

Computes the bounding box of all the objects stored in all the visible layers in the specified manager view. If a transformer is associated with the view, the returned rectangle is the bounding box of the transformed objects.

Parameters

bbox	Used to return the bounding box.
view	The manager view.

virtual void IlvManager::contentsChanged ( )

virtual

Called automatically by the manager each time objects are created, removed, moved, or resized in the manager.

The default implementation of this member function sets the manager state to a modified state (see the IlvManager::isModified and IlvManager::setModified member functions). If the function IlvSetContentsChangedUpdate allows it, the method calls each IlvManagerViewHook::contentsChanged member function of any existing hooks connected to the managed views.

virtual char* IlvManager::copy ( IlUInt & count )

virtual

Saves all the selected graphic objects in a string.

Returns: The string where the selected objects have been saved. When the returned string is no longer useful, the caller must delete it by using the C++ operator delete [].

Parameters

count Indicates the length of the returned string in bytes.

void IlvManager::copyToClipboard ( )

Saves the selected graphic objects in the clipboard.

Copies all the selected objects in the clipboard. It uses the IlvManager::copy member function.

virtual IlvManagerInputFile* IlvManager::createInputFile ( istream & stream )

virtual

Creates an IlvManagerInputFile from an input stream.

This method can be overloaded by subclasses, allowing them to create an IlvManagerInputFile subclass adapted to their needs.

Returns: An instance of IlvManagerInputFile, or a subclass.

Parameters

stream The input stream.

virtual IlvManagerInputFile* IlvManager::createInputFile ( ILVSTDPREF istream & stream )

virtual

Creates an IlvManagerInputFile from an input stream.

This method can be overloaded by subclasses, allowing them to create an IlvManagerInputFile subclass adapted to their needs.

Returns: An instance of IlvManagerInputFile, or a subclass.

Parameters

stream The input stream.

virtual IlvManagerOutputFile* IlvManager::createOutputFile ( ostream & stream ) const

virtual

Creates an IlvManagerOutputFile from an output stream.

This method can be overloaded by subclasses, allowing them to create an IlvManagerOutputFile subclass adapted to their needs.

Parameters

stream The output stream.

Returns: An instance of IlvManagerOutputFile, or a subclass. The implementation for the IlvManager class is:
IlvManagerOutputFile*

IlvManager::createOutputFile(ostream& stream) const

{

return new IlvManagerOutputFile(stream, this);

}

virtual IlvManagerOutputFile* IlvManager::createOutputFile ( ILVSTDPREF ostream & stream ) const

virtual

Creates an IlvManagerInputFile from an input stream.

This method can be overloaded by subclasses, allowing them to create an IlvManagerInputFile subclass adapted to their needs.

Returns: An instance of IlvManagerInputFile, or a subclass.

Parameters

stream The input stream.

virtual char* IlvManager::cut ( IlUInt & count )

virtual

Saves the selected graphic objects in a string and then deletes them.

Returns: The string where the selected objects have been saved. When the returned string is no longer useful, the caller must delete it by using the C++ operator delete [].

Parameters

count Indicates the length of the returned string in bytes.

void IlvManager::cutToClipboard ( )

Saves the selected graphic objects in the clipboard and deletes them.

Cuts all the selected objects in the clipboard. It uses the IlvManager::cut member function.

virtual void IlvManager::deleteAll	(	IlBoolean	destroy,
		IlBoolean	redraw
	)

virtual

Removes all the graphic objects from the manager.

Parameters

destroy	Indicates whether the manager must delete the objects
redraw	Indicates whether the manager must redraw its views after removing them.

virtual void IlvManager::deleteAll	(	int	layer,
		IlBoolean	destroy,
		IlBoolean	redraw
	)

virtual

Removes all the objects stored in a specified layer of the manager.

Parameters

layer	The index of the manager layer.
destroy	Indicates whether the manager must delete the objects after removing them.
redraw	Indicates whether the manager must redraw the views attached to it.

virtual void IlvManager::deleteSelections ( IlBoolean redraw = IlTrue )

virtual

Removes the selected objects from the manager and deletes them if undo is disabled.

By default, undo is enabled.

Parameters

redraw Specifies whether the manager must refresh its views.

virtual void IlvManager::deSelectAll ( IlBoolean redraw = IlTrue )

virtual

Deselects the selected graphic objects.

Deselects all previously selected objects.

Parameters

redraw Specifies whether the manager must refresh its views.

void IlvManager::disableRedrawTask ( )

Deactivates the lazy redraw mechanism.

This function prevents the lazy redraw task from happening when the process is idle. Any subsequent call to IlvManager::invalidateRegion will restore the lazy redraw mechanism and reschedule a redraw task.

virtual IlBoolean IlvManager::dispatchToObjects	(	IlvEvent &	,
		IlvView *
	)

virtual

Dispatches an event to the appropriate graphic objects.

Called by the manager event handler for every incoming user event when no view interactor was set in the view where the event occurred. It checks whether there is an object under the cursor. If there is one and if it is associated with an interactor, the event handler propagates the event to the interactor.

Returns: IlTrue if the object interactor handled the event. If there is no object under the pointer or if its object interactor cannot handle the event, the returned value is IlFalse.

Reimplemented in IlvGadgetManager.

virtual void IlvManager::draw	(	IlvView *	view,
		IlBoolean	erase,
		const IlvRegion *	clip = `0`
	)		const

virtual

Draws the graphic objects of the manager in a manager view.

The drawing is restricted to the area of the clipping region, if any. Only the visible layers for this view and the visible objects on these layers are drawn. If the view is not associated with this manager, nothing is done.

Parameters

view	The manager view.
erase	Indicates whether the view (or the clipping region in the view) must be erased before drawing (see `IlvAbstractView::erase`).
clip	The clipping region. `0` means that the drawing is not clipped.

void IlvManager::draw	(	IlvPort *	dst,
		const IlvTransformer *	t = `0`,
		const IlvRegion *	region = `0`,
		const IlvRegion *	clip = `0`
	)		const

Draws the contents of a manager in a destination port.

Draws visible graphic objects of the manager in the specified destination port. An affine transformation can be specified by the transformer. Only visible objects in visible layers are affected by this drawing request. These objects must be at least partially located inside the region specified by the region parameter. If this parameter is set to 0, all objects on all visible layers are drawn. Also, the drawing is restricted to the clipping region, if any. The possibility of drawing directly to an IlvPort instead of an IlvView was implemented for the dump module when you need to explicitly set the clipping region. The other member functions IlvManager::draw would clip the clipping region with the visible part of the destination view.

Parameters

dst	The destination port.
t	The transformer.
region	Only objects intersecting this region are drawn.
clip	The clipping region.

void IlvManager::draw	(	int	layer,
		IlvPort *	dst,
		const IlvTransformer *	t = `0`,
		const IlvRegion *	region = `0`,
		const IlvRegion *	clip = `0`
	)		const

Draws the contents of a manager layer in a destination port.

Draws visible graphic objects of a given manager layer in the specified destination port. An affine transformation can be specified by the transformer. To be drawn, an object must be at least partially located inside the region specified by the region parameter. If this parameter is set to 0, all objects on all visible layers are drawn. Also, the drawing is restricted to the clipping region.

Parameters

layer	The index of the manager layer.
dst	The destination port.
t	The transformer.
region	Only objects intersecting this region are drawn.
clip	The clipping region.

void IlvManager::draw ( ) const

Draws the contents of the manager.

Draws all visible graphic objects of the manager in all managed views.

virtual void IlvManager::duplicate	(	IlvPos	dx = `0`,
		IlvPos	dy = `0`
	)

virtual

Duplicates the selected graphic objects.

Copies the selected objects and adds them to the manager. The copied objects are translated from their original positions.

Parameters

dx	The translation offset along the horizontal axis.
dy	The translation offset along the vertical axis.

virtual IlvSmartSet* IlvManager::duplicateSmartSet	(	IlvSmartSet *	set,
		IlvPos	dx = `0`,
		IlvPos	dy = `0`
	)

virtual

Makes a copy of a smartset.

set must be stored in this manager. The objects are duplicated, keeping their intrinsic names and interactors. The new smartset has the same geometry as the original but can be translated if the horizontal and vertical offsets are specified.

Returns: The copy of the original smartset. The returned smartset has a name built from the name of the original smartset, modified by the call to IlvManager::addSmartSet.

Parameters

set	The original smartset.
dx	The horizontal translation offset.
dy	The vertical translation offset.

void IlvManager::ensureVisible	(	IlvView *	view,
		const IlvPoint &	point
	)

Translates the contents of a manager view in order to make a given location visible.

Applies a translation to the manager view transformer to scroll the graphic objects, so that a given location becomes visible. If the location is already visible (in the boundaries of the view), nothing is done.
Special case: A view is scrollable if it is the child of an IlvScrollView (and not IlvScrolledView). In this case, the view transformer is not changed and the view is scrolled instead.
The redraw is performed automatically.

Parameters

view	The manager view.
point	The point in the view coordinate system.

void IlvManager::ensureVisible	(	IlvView *	view,
		const IlvRect &	rect
	)

Translates the contents of a manager view in order to make a given rectangle visible.

Applies a translation to the transformer of the manager view to scroll the graphic objects, so that the four corners of the specified rectangle become visible. If they are already visible, nothing is done. If the rectangle is wider than the view, the rectangle will be horizontally centered. If the rectangle is higher than the view, it will be vertically centered. Special case: A view is scrollable if it is the child of an IlvScrollView (and not IlvScrolledView). In this case, the view transformer is not changed and the view is scrolled instead.
The redraw is performed automatically.

Parameters

view	The manager view.
rect	The rectangle in the view coordinate system.

virtual void IlvManager::eraseRegion	(	IlvView *	view,
		const IlvRegion &	region
	)		const

virtual

Erases a region of a manager view.

Parameters

view	The manager view.
region	The region in the manager view coordinate system.

IlvGraphic* IlvManager::filteredLastContains	(	const IlvPoint &	p,
		const IlvView *	view,
		const IlvGraphicFilter &	f
	)		const

Returns the graphic object containing a given point.

Parameters

p	Specifies the point in the view coordinate system.
view	The manager view.
f	The filter function.

Returns: A pointer to the object at the given location in the view. The object must be accepted by the filter function. The method takes into account the stack of layers in which objects are stored. The manager returns the object on the top of the stack.

IlvGraphic* IlvManager::filteredLastContains	(	int	layer,
		const IlvPoint &	p,
		const IlvView *	view,
		const IlvGraphicFilter &	f
	)		const

Returns the graphic object containing a given point in a layer.

Parameters

layer	The index of the manager layer.
p	Specifies the point in the view coordinate system.
view	The manager view.
f	The filter function.

Returns: A pointer to the object of the manager layer at the given location in the view. The object must be accepted by the filter function.

IlvGraphic* IlvManager::firstIntersects	(	const IlvRegion &	tr,
		const IlvTransformer *	t
	)		const

Returns the first object intersecting a region.

Parameters

tr	The (transformed) region.
t	The transformer.

Returns: A pointer to the first object whose bounding box intersects the region when the object is transformed.

IlvGraphic* IlvManager::firstIntersects ( const IlvRect & r )

Returns the name of the manager.

Returns: The name of the manager.

IlvGraphic* IlvManager::firstIntersects	(	int	layer,
		const IlvRegion &	tr,
		const IlvTransformer *	t
	)		const

Returns the first object of a layer intersecting a region.

Parameters

layer	The index of the manager layer.
tr	The (transformed) region.
t	The transformer.

Returns: A pointer to the first object of the layer whose bounding box intersects the region when the object is transformed.

IlvGraphic* IlvManager::firstIntersects	(	int	layer,
		const IlvRect &	r
	)

Adds an object to the manager.

If an object is inserted in a non-existent layer, the layer, as well as any intermediate ones, are automatically created. For example, by default, a manager is created with three layers (0, 1 and 2); the code

addObject(obj, IlTrue, 5);

creates layers 3, 4, and 5. An object cannot be added to a manager more than once.

Parameters

object	The graphic object.
redraw	Indicates whether the manager must immediately display the object.
layer	Specifies the layer index where the object must be inserted. The default value `-1` indicates that the object is stored in the last (topmost) layer.

Warning: [note] You can accelerate the process of storing and removing objects to and from the manager. When you call IlvManager::addObject or IlvManager::removeObject, tests ensure that the data structure remains consistent. These tests ensure that an object is not stored twice, or remove an object that is not stored in this manager. You can bypass these tests and accelerate the process of storing and removing objects in a manager. See the global functions IlvGetOptimizeMode and IlvSetOptimizeMode.

void IlvManager::fitToContents ( IlvView * view )

Resizes a manager view to fit the bounding box of the graphic objects.

Resizes the view associated with this manager, so that it contains every object stored in all the visible layers. The new size of the view is computed with the current transformer.

Parameters

view	The manager view.

void IlvManager::fitTransformerToContents	(	const IlvView *	view,
		IlBoolean	redraw = `IlTrue`,
		IlBoolean	ratio = `IlFalse`
	)

Rescales the contents of a manager view to fit in the view.

Applies a scaling factor and a translation to the manager view transformer so that the manager fits in the boundaries of the view. The view is not resized itself. The horizontal scaling factor is such that the width of the transformed bounding box of the objects is the view width. Similarly, the vertical scaling factor is such that the height of the transformed bounding box of the objects is the view height. Only objects in visible layers are taken into account.

The computation of scaling factors is not always accurate: it assumes that the bounding box of a transformed graphic object is equal to the transformed bounding box, which is not true for non-zoomable objects. If there are such objects in the manager, several calls to the method may be necessary to obtain the desired result.

Parameters

view	The manager view.
redraw	Indicates whether the manager must redraw the objects in the view after the transformation.
keepRatio	If `IlTrue`, horizontal and vertical scaling factors are equal, thereby preserving the x/y ratio.

virtual void IlvManager::flushRedraw ( )

virtual

Performs the actual redraw of invalid regions.

This function is called as an idle procedure just before a process becomes idle to handle all pending drawing tasks accumulated by calls to IlvManager::invalidateRegion. You can call it if you want to force the refresh of your views at a given point in your program, if the redraw task has not been disabled.

See Also: IlvEventLoop::addIdleProc.

void IlvManager::forgetUndo ( )

Resets the undo command queue.

Empties the command queue of the manager. Call this function whenever a command that cannot be undone is applied to the manager objects. In this case, the manager can no longer undo previous commands.

virtual IlBoolean IlvManager::gadgetShortCut ( IlvEvent & )

virtual

Dispatches an event to the appropriate graphic objects.

Called by the manager event handler for every incoming user event when no view interactor was set in the view where the event occurred. It checks whether there is an object under the cursor. If there is one and if it is associated with an interactor, the event handler propagates the event to the interactor.

Returns: IlTrue if the object interactor handled the event. If there is no object under the pointer or if its object interactor cannot handle the event, the returned value is IlFalse.

Reimplemented in IlvGadgetManager.

static IlvManager* IlvManager::Get ( const IlvView * view )

static

Returns the manager connected to the specified view, if any.

Parameters

view The view.

Returns: A pointer to the manager connected to view if any, 0 otherwise.

See Also: IlvManager::addView

IlBoolean IlvManager::getAccelerator	(	IlvManagerAcceleratorAction *	f,
		IlAny *	userArg,
		IlvEventType	type,
		IlUShort	buttonOrKey = `0`,
		IlUShort	modifiers = `0`
	)

Gets an accelerator action matching an event description.

Looks for a manager accelerator matching an event description. If one is found and if the action and userArg parameters are not 0, these parameters are used to return the accelerator action and user argument.

Returns: IlTrue if a matching accelerator is found and IlFalse otherwise.

Parameters

f	Used to return the accelerator action.
userArg	Used to return the action argument.
type	The event type.
buttonOrKey	The event data.
modifiers	The event modifiers.

IlvManagerAccelerator* IlvManager::getAccelerator	(	IlvEventType	type,
		IlUShort	buttonOrKey = `0`,
		IlUShort	modifiers = `0`
	)

Installs an event hook on the manager.

The last event hook installed is the first to be called when an event occurs.

Returns: IlTrue on success. If the hook is already installed on a manager, this member function does nothing and returns IlFalse.

Parameters

hook	The event hook.

IlvGraphicCallback IlvManager::getCallback ( const IlSymbol * cbName ) const

Registers a callback and its name.

Associates the user callback function with a string that will be used as its name. This string will be registered using the IlSymbol class.

Parameters

callbackName	The character string.
callback	The user function.

const IlAList* IlvManager::getCallbackNames ( ) const

Registers a callback and its name.

Associates the user callback function with a string that will be used as its name. This string will be registered using the IlSymbol class.

Parameters

callbackName	The character string.
callback	The user function.

IlUInt IlvManager::getCardinal ( ) const

Returns the number of graphic objects.

Returns: The total number of graphic objects stored in this manager.

IlUInt IlvManager::getCardinal ( int layer ) const

Returns the number of graphic objects in a layer.

Returns: The number of objects stored in a manager layer.

Parameters

layer The index of the layer.

IlAny IlvManager::getClientData ( ) const

Groups several graphic objects.

Creates an IlvGraphicSet object by grouping the graphic objects in the array. When objects are grouped, they lose all the manager-related information they contain (such as name, storage layer, and object interactor). You cannot retrieve this information, even when ungrouping.

Returns: The graphic set grouping the graphic objects.

Parameters

count	The number of graphic objects in the array.
objects	The array of graphic objects.

IlvCommandHistory* IlvManager::getCommandHistory ( ) const

Returns the object which handles the stack of commands.

Returns: The object which handles a stack of commands that are applied to objects held by a manager and lets you undo and redo these commands.

IlvPalette* IlvManager::getCreatorPalette ( ) const

Gets the default palette used to create graphic objects interactively.

Returns: The palette used to create new objects interactively using the predefined interactors. These interactors call this member function to give a palette to graphic object constructors.

IlvDisplay* IlvManager::getDisplay ( ) const

Returns the display.

Returns: The IlvDisplay object for which this manager was built.

IlvBitmap* IlvManager::getDoubleBufferingBitmap ( const IlvView * ) const

Enables or disables double buffering for a manager view.

Returns: IlFalse if the view is not handled by the manager, or if useDB is set to IlTrue and the double buffering bitmap associated with view is not valid. Otherwise, it returns IlTrue.

Parameters

view	The manager view.
useDB	`IlTrue` to enable double buffering and `IlFalse` to disable it.
tmp	Not documented

IlvManagerDblBufferHandler* IlvManager::getDoubleBufferingHandler ( ) const

Enables or disables double buffering for a manager view.

Returns: IlFalse if the view is not handled by the manager, or if useDB is set to IlTrue and the double buffering bitmap associated with view is not valid. Otherwise, it returns IlTrue.

Parameters

view	The manager view.
useDB	`IlTrue` to enable double buffering and `IlFalse` to disable it.
tmp	Not documented

IlvEditableFilter* IlvManager::getEditableFilter ( ) const

Adds an object to the manager.

If an object is inserted in a non-existent layer, the layer, as well as any intermediate ones, are automatically created. For example, by default, a manager is created with three layers (0, 1 and 2); the code

addObject(obj, IlTrue, 5);

creates layers 3, 4, and 5. An object cannot be added to a manager more than once.

Parameters

object	The graphic object.
redraw	Indicates whether the manager must immediately display the object.
layer	Specifies the layer index where the object must be inserted. The default value `-1` indicates that the object is stored in the last (topmost) layer.

Warning: [note] You can accelerate the process of storing and removing objects to and from the manager. When you call IlvManager::addObject or IlvManager::removeObject, tests ensure that the data structure remains consistent. These tests ensure that an object is not stored twice, or remove an object that is not stored in this manager. You can bypass these tests and accelerate the process of storing and removing objects in a manager. See the global functions IlvGetOptimizeMode and IlvSetOptimizeMode.

IlvManagerEventHook* IlvManager::getEventHooks ( ) const

Installs an event hook on the manager.

The last event hook installed is the first to be called when an event occurs.

Returns: IlTrue on success. If the hook is already installed on a manager, this member function does nothing and returns IlFalse.

Parameters

hook	The event hook.

IlvView* IlvManager::getFirstView ( ) const

Returns the first view associated with the manager.

Returns: A pointer to the first view managed by the manager, if there is one. Otherwise it returns 0.

IlvManagerGrid* IlvManager::getGrid ( const IlvView * view ) const

Returns the manager grid associated with a manager view.

Returns: The IlvManagerGrid object associated with the manager view. It returns 0 if no grid is applied to the view.

int IlvManager::getInsertionLayer ( ) const

Gets the default layer used to store the graphic objects created interactively.

Returns: The layer where new objects created interactively using the predefined interactors are stored. These interactors call this member function before inserting new objects in the manager with IlvManager::addObject.

IlvManagerViewInteractor* IlvManager::getInteractor ( const IlvView * view ) const

Returns the view interactor associated with a manager view.

Returns: The view interactor associated with the manager view, and 0 if there is none.

Parameters

view	The manager view.

int IlvManager::getLayer ( const IlvGraphic * object ) const

Returns the manager layer containing a given graphic object.

Returns: The index of the layer where the graphic object is stored. If the object is not found in any layer, the returned value is -1.

Parameters

object The graphic object.

int IlvManager::getLayerIndex ( const IlvManagerLayer * ) const

Returns the index of a manager layer instance.

Returns: The index of the manager layer.

Warning: [note] Layers are handled by a specific class, IlvManagerLayer, which is not described in this manual. Layers can be accessed by their index, or by their instance (a pointer to an IlvManagerLayer object).

static IlvManager* IlvManager::getManager ( const IlvGraphic * object )

static

Gets the manager holding a given graphic object.

Parameters

object The graphic object.

Returns: The manager where the graphic object is stored. If the object is not stored in any manager, this static member function returns 0.

IlvManagerLayer* IlvManager::getManagerLayer ( const char * layerName ) const

Indicates whether a layer is considered visible by the manager.

Returns: IlTrue if the layer is visible from the manager point of view. The layer may still be hidden in a manager view.

Parameters

layer The index of the layer.

IlvManagerLayer* IlvManager::getManagerLayer ( const IlvGraphic * object ) const

Returns the IlvManagerLayer instance of a graphic object.

Returns: The layer where the graphic object is stored.

Parameters

object The graphic object.

Warning: [note] Layers are handled by a specific class, IlvManagerLayer, which is not described in this manual. Layers can be accessed by their index specification, or by their instance (a pointer to an IlvManagerLayer object). When you change the order of layers in a manager, you lose their original index specifications. The pointer, however, remains the same and you can keep track of the layers by using it.

IlvManagerLayer* IlvManager::getManagerLayer ( int i ) const

Returns the IlvManagerLayer instance from its index.

Most of the time, manager layers are referred to by their index. However, it can be useful to get a pointer to the manager layer instance. This member function allows you to get a layer instance from its index in the manager. (See the note concerning the IlvManagerLayer class).

Returns: The pointer to the manager layer instance from its index.

const char* IlvManager::getName ( ) const

Returns the name of the manager.

Returns: The name of the manager.

int IlvManager::getNumLayers ( ) const

Returns the number of manager layers.

Returns: The number of layers in the manager.

IlvGraphic* IlvManager::getObject ( const char * name ) const

Gets a graphic object by its name.

Returns: The graphic object with the specified name, or 0 if no object was given this name in the manager.

Parameters

name	The object name.

IlvManagerObjectInteractor* IlvManager::getObjectInteractor ( const IlvGraphic * object ) const

The object interactor associated with a graphic object.

Returns: The object interactor associated with a graphic object, or 0 if there is none.

Parameters

object The graphic object.

const char* IlvManager::getObjectName ( const IlvGraphic * object ) const

Returns the name of a graphic object.

Returns: The name associated with the object in the manager, or 0 if the object has no name.

Parameters

object The graphic object.

virtual IlvGraphic* const* IlvManager::getObjects ( IlUInt & count ) const

virtual

Returns the graphic objects stored in the manager.

Parameters

count The number of objects returned in the array.

Returns: An array of pointers to all objects stored in this manager. The array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

This member function is rarely used, since you can implement your code by means of the member functions described in the "Applying Functions to Objects" section.

virtual IlvGraphic* const* IlvManager::getObjects	(	int	layer,
		IlUInt &	count
	)		const

virtual

Returns the graphic objects stored in a manager layer.

Parameters

layer	The index of the layer.
count	The number of objects returned in the array.

Returns: An array of pointers to all objects stored in the specified manager layer. The array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

This member function is rarely used, since you can implement your code by means of the member functions described in the "Applying Functions to Objects" section.

IlvPalette* IlvManager::getPalette ( ) const

Returns the manager palette.

Returns: The IlvPalette object of the manager. The palette is dedicated to temporary drawings that provide visual feedback. For example, it is used to draw ghost images.
The draw mode of the palette is set to XOR.

IlvGraphic* const* IlvManager::getPersistentObjects ( IlUInt & count ) const

Adds an object to the manager.

If an object is inserted in a non-existent layer, the layer, as well as any intermediate ones, are automatically created. For example, by default, a manager is created with three layers (0, 1 and 2); the code

addObject(obj, IlTrue, 5);

creates layers 3, 4, and 5. An object cannot be added to a manager more than once.

Parameters

object	The graphic object.
redraw	Indicates whether the manager must immediately display the object.
layer	Specifies the layer index where the object must be inserted. The default value `-1` indicates that the object is stored in the last (topmost) layer.

Warning: [note] You can accelerate the process of storing and removing objects to and from the manager. When you call IlvManager::addObject or IlvManager::removeObject, tests ensure that the data structure remains consistent. These tests ensure that an object is not stored twice, or remove an object that is not stored in this manager. You can bypass these tests and accelerate the process of storing and removing objects in a manager. See the global functions IlvGetOptimizeMode and IlvSetOptimizeMode.

IlvReDrawMode IlvManager::getReDrawMode ( ) const

Returns the redraw mode of the manager.

Returns: The current redraw mode of the manager.

IlvDrawSelection* IlvManager::getSelection ( const IlvGraphic * object ) const

Returns the selection object of a graphic object.

Parameters

object The graphic object.

Returns: The drawn selector object (the one created when an object is selected), or 0 if the graphic object is not selected. The selector object is an internal IlvGraphic used to draw selections and test against mouse events.

IlvManagerSelectionHook* IlvManager::getSelectionHooks ( ) const

Sets the function that creates a selection object for a graphic object.

Changes the function called to create the graphic object that represents the selection of an object. The function func is called when an object becomes selected. The function receives a pointer to this manager, and a pointer to the object itself. It then creates a selection object (a subtype of the IlvDrawSelection graphic class) and returns a pointer to the object. This object is entirely managed by Rogue Wave Views, and removed when finished with.
The default behavior of a manager is to create an IlvDrawSelection instance (one having eight square handles) that fits the object bounding box. However, you may need to have another type of selection object. To create this new type of selection object, subtype the IlvDrawSelection class and create a function that instantiates this class depending of the type of the graphic object selected. This function is the parameter to the IlvManager::setMakeSelection member function.

Returns: The previous function used by the manager.

Parameters

func	The new selection function.

Warning: [note] A better way to customize the selection objects is to use the IlvSelectionInterface class. It allows you to associate different subclasses of IlvDrawSelection with different subclasses of IlvGraphic.

See Also: IlvSelectionInterface

IlvGraphic* const* IlvManager::getSelections ( IlUInt & count ) const

Returns the selected graphic objects.

Parameters

count Used to return the number of graphic objects in the array.

Returns: An array of pointers to the selected objects. The array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

Warning: [note] This member function should rarely be used, since the IlvManager::applyToSelections member function is available.

IlvSmartSet* IlvManager::getSmartSet ( const char * name ) const

Gets a smartset by its name.

Returns: The IlvSmartSet with the specified name, or 0 if there is none.

Parameters

name	The smartset name.

IlvGraphic* const* IlvManager::getTaggedObjects	(	const IlSymbol *	tag,
		IlUInt &	count
	)		const

Returns the graphic objects associated with a given tag.

Returns: An array of pointers to the objects stored in the manager and associated with the specified tag, or 0 if none are found. The array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

Parameters

tag	Specifies a tag.
count	Used to return the number of graphic objects in the returned array.

IlvTransformer* IlvManager::getTransformer ( const IlvView * view ) const

Returns the transformer associated with a manager view.

Returns: A pointer to the transformer associated with the view.

Parameters

view	The manager view.

IlvMgrView* IlvManager::getView ( const IlvView * v ) const

Returns the IlvMrgView of a manager view.

Returns: The instance of IlvMrgView representing the specified view. If v is not associated with the manager, the function returns 0.

Parameters

v The view.

IlvLink* IlvManager::getViewHookList ( const IlvView * view ) const

Adds a view hook to the manager.

Adds the hook to the list of handlers for the view to which the hook is attached. Previous hooks are not removed, but this one becomes the first to be called.

Parameters

hook	The manager view hook.

IlvManagerViewHook* const* IlvManager::getViewHooks	(	const IlvView *	view,
		IlUInt &	count
	)		const

Gets the view hooks of a manager view.

Returns: An array of pointers to the view hooks connected to the specified manager view. The array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

Parameters

view	The manager view.
count	Used to return the number of view hooks in the returned array.

IlvView** IlvManager::getViews ( IlUInt & count ) const

Returns the array of views associated with the manager.

Parameters

count Used to return the number of views in the array.

Returns: An array of pointers to all the views connected to this manager. The array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

virtual IlvGraphicSet* IlvManager::group	(	IlUInt	count,
		IlvGraphic const	objects
	)

virtual

Groups several graphic objects.

Creates an IlvGraphicSet object by grouping the graphic objects in the array. When objects are grouped, they lose all the manager-related information they contain (such as name, storage layer, and object interactor). You cannot retrieve this information, even when ungrouping.

Returns: The graphic set grouping the graphic objects.

Parameters

count	The number of graphic objects in the array.
objects	The array of graphic objects.

IlBoolean IlvManager::handleEventHooks	(	IlvEvent &	event,
		IlvView *	view
	)

Installs an event hook on the manager.

The last event hook installed is the first to be called when an event occurs.

Returns: IlTrue on success. If the hook is already installed on a manager, this member function does nothing and returns IlFalse.

Parameters

hook	The event hook.

virtual void IlvManager::handleInput	(	IlvEvent &	event,
		IlvView *	view
	)

virtual

Installs an event hook on the manager.

The last event hook installed is the first to be called when an event occurs.

Returns: IlTrue on success. If the hook is already installed on a manager, this member function does nothing and returns IlFalse.

Parameters

hook	The event hook.

Reimplemented in IlvGadgetManager.

void IlvManager::initReDraws ( )

Initializes the manager so that calls to IlvManager::invalidateRegion can begin.

Called to initialize the manager before a series of calls to the member function IlvManager::invalidateRegion begin. It empties the update region for every managed view. Calls to IlvManager::initReDraws can be embedded so that the actual refresh only takes place when the last call to IlvManager::reDrawViews is reached.

virtual void IlvManager::installAccelerators ( )

virtual

Adds an object to the manager.

If an object is inserted in a non-existent layer, the layer, as well as any intermediate ones, are automatically created. For example, by default, a manager is created with three layers (0, 1 and 2); the code

addObject(obj, IlTrue, 5);

creates layers 3, 4, and 5. An object cannot be added to a manager more than once.

Parameters

object	The graphic object.
redraw	Indicates whether the manager must immediately display the object.
layer	Specifies the layer index where the object must be inserted. The default value `-1` indicates that the object is stored in the last (topmost) layer.

Warning: [note] You can accelerate the process of storing and removing objects to and from the manager. When you call IlvManager::addObject or IlvManager::removeObject, tests ensure that the data structure remains consistent. These tests ensure that an object is not stored twice, or remove an object that is not stored in this manager. You can bypass these tests and accelerate the process of storing and removing objects in a manager. See the global functions IlvGetOptimizeMode and IlvSetOptimizeMode.

void IlvManager::installDrawHook ( IlvManagerDrawHook * hook )

Groups several graphic objects.

Creates an IlvGraphicSet object by grouping the graphic objects in the array. When objects are grouped, they lose all the manager-related information they contain (such as name, storage layer, and object interactor). You cannot retrieve this information, even when ungrouping.

Returns: The graphic set grouping the graphic objects.

Parameters

count	The number of graphic objects in the array.
objects	The array of graphic objects.

IlBoolean IlvManager::installEventHook ( const IlvManagerEventHook * hook )

Installs an event hook on the manager.

The last event hook installed is the first to be called when an event occurs.

Returns: IlTrue on success. If the hook is already installed on a manager, this member function does nothing and returns IlFalse.

Parameters

hook	The event hook.

IlBoolean IlvManager::installSelectionHook ( const IlvManagerSelectionHook * hook )

Sets a selection hook on the manager.

Parameters

hook	The selection hook.

Returns: IlTrue on success. If the hook is already installed on a manager, the member function does nothing and returns IlFalse.

void IlvManager::installViewHook ( const IlvManagerViewHook * hook )

Adds a view hook to the manager.

Adds the hook to the list of handlers for the view to which the hook is attached. Previous hooks are not removed, but this one becomes the first to be called.

Parameters

hook	The manager view hook.

void IlvManager::invalidateRegion ( const IlvGraphic * object )

Invalidates the bounding box of a graphic object.

Adds the bounding box of a graphic object to the update region in every view and schedules a redraw task to happen before the process becomes idle.

Parameters

object The graphic object. The object must be directly held by the manager, and indirectly through an other object like a IlvGraphicSet or IlvTransformer.

void IlvManager::invalidateRegion ( const IlvRect & rect )

Invalidates a rectangle.

Adds a rectangle to the update region in every view and schedules a redraw task to happen before the process becomes idle.

Parameters

rect	The rectangle, specified in manager coordinates.

void IlvManager::invalidateRegion	(	const IlvView *	view,
		const IlvRect &	rect
	)

Invalidates a rectangle in a manager view.

Adds a rectangle to the update region of the specified manager view and schedules a redraw task to happen before the process becomes idle.

Parameters

view	The manager view.
rect	The rectangle, specified in manager coordinates.

void IlvManager::invalidateRegion	(	const IlvRegionUpdater &	updater,
		const IlvGraphic *	g = `0`
	)

Updates the invalidated region.

Uses the updater object to update the invalidated region and schedules a redraw task to happen before the process becomes idle.

Parameters

updater	The object used to update the invalidated region.
g	An optional parameter to specify which graphic object requests the invalidation.

See Also: IlvRegionUpdater::update.

IlBoolean IlvManager::isASelection ( const IlvGraphic * object ) const

Indicates if a graphic object is a selection object.

Parameters

object The graphic object.

Returns: IlTrue if the object is a selection (that is, a subtype of IlvDrawSelection). Otherwise, it returns IlFalse.

IlBoolean IlvManager::isDoubleBuffering ( const IlvView * view ) const

Indicates whether double buffering is used for a manager view.

Returns: IlTrue if double buffering is applied to the view, and IlFalse otherwise.

Parameters

view	The manager view.

IlBoolean IlvManager::isEditable ( const IlvGraphic * object ) const

Indicates whether a graphic object can be edited.

This property is used by the IlvSelectInteractor class to check if object can be manipulated through its selection object. This property concerns the editing operations that are not a resize (see IlvManager::isResizeable) or a translation (IlvManager::isMoveable).

Returns: IlTrue if this object can be edited, and IlFalse otherwise.

Parameters

object The graphic object.

See Also: IlvDrawSelection::getSelectionInteractor.

IlBoolean IlvManager::isEditable	(	const IlvGraphic *	object,
		const IlvView *
	)		const

Adds an object to the manager.

If an object is inserted in a non-existent layer, the layer, as well as any intermediate ones, are automatically created. For example, by default, a manager is created with three layers (0, 1 and 2); the code

addObject(obj, IlTrue, 5);

creates layers 3, 4, and 5. An object cannot be added to a manager more than once.

Parameters

object	The graphic object.
redraw	Indicates whether the manager must immediately display the object.
layer	Specifies the layer index where the object must be inserted. The default value `-1` indicates that the object is stored in the last (topmost) layer.

Warning: [note] You can accelerate the process of storing and removing objects to and from the manager. When you call IlvManager::addObject or IlvManager::removeObject, tests ensure that the data structure remains consistent. These tests ensure that an object is not stored twice, or remove an object that is not stored in this manager. You can bypass these tests and accelerate the process of storing and removing objects in a manager. See the global functions IlvGetOptimizeMode and IlvSetOptimizeMode.

IlBoolean IlvManager::isInApply ( ) const

Indicates if an applyTo...() method is being executed.

Returns: IlTrue if it is called from within a call to any apply member function. Use this function to avoid nested calls to apply...() member functions.

IlBoolean IlvManager::isInvalidating ( ) const

Indicates whether the manager is in a phase of invalidating regions.

Returns: IlTrue if the manager has scheduled some redraw task to perform when the process is idle.

IlBoolean IlvManager::isKeepingAspectRatio ( const IlvView * view ) const

Indicates whether a manager view preserves the x/y ratio.

Returns: IlTrue if the manager view automatically respects the aspect ratio (that is, the x/y ratio) when its transformer is changed. Otherwise, it returns IlFalse (which is the default). When the aspect ratio must be kept, the transformer set to view using IlvManager::setTransformer or IlvManager::addTransformer may be modified by the manager. This works correctly only for trivial rotations (multiple of 90 degrees).

Parameters

view	The manager view.

IlBoolean IlvManager::isManaged ( const IlvGraphic * object ) const

Indicates whether a graphic object is stored by the manager.

Returns: IlTrue if the given graphic object is stored in the manager. Otherwise, it returns IlFalse.

Parameters

object The graphic object.

IlBoolean IlvManager::isModified ( ) const

Indicates whether the manager contents have been modified.

Returns: An IlBoolean value indicating the state of the manager. At the beginning, when no objects have yet been modified, the method returns IlFalse. The state changes to IlTrue when an object is modified or added. This is useful for checking the manager state before leaving the application without saving the information it contains.

IlBoolean IlvManager::isMoveable ( const IlvGraphic * object ) const

Indicates if a graphic object can be moved.

Returns: IlTrue if the object is moveable, and IlFalse otherwise.

Parameters

object The graphic object.

IlBoolean IlvManager::isResizeable ( const IlvGraphic * object ) const

Indicates if a graphic object can be resized.

Returns: IlTrue if the object can be resized, and IlFalse otherwise.

Parameters

object The graphic object.

IlBoolean IlvManager::isSelectable ( int layer ) const

Indicates if a manager layer allows the selection of its graphic objects.

Returns: IlTrue if the layer allows the selection of the graphic objects it stores. Otherwise, the function returns IlFalse.

Parameters

layer The index of the manager view.

virtual IlBoolean IlvManager::isSelectable ( const IlvGraphic * obj ) const

virtual

Indicates if a graphic object can be selected.

Returns: IlTrue if the object can be selected, and IlFalse otherwise.

IlBoolean IlvManager::isSelected ( const IlvGraphic * obj ) const

Indicates if a graphic object is selected.

Returns: IlTrue if the graphic object is selected, IlFalse otherwise.

IlBoolean IlvManager::isUndoEnabled ( ) const

Indicates whether the manager lets you undo commands.

Returns: IlTrue if the undo process is enabled. Otherwise, it returns IlFalse.

IlBoolean IlvManager::isVisible ( int layer ) const

Indicates whether a layer is considered visible by the manager.

Returns: IlTrue if the layer is visible from the manager point of view. The layer may still be hidden in a manager view.

Parameters

layer The index of the layer.

IlBoolean IlvManager::isVisible	(	const IlvView *	view,
		int	layer
	)		const

Indicates the visibility of a layer in a manager view.

The visibility of a layer has two levels: a global level for the manager, and a local level stored by each manager view. A layer is considered to be visible in a manager view if it is visible both for the manager and for the view.

Returns: IlTrue if the layer is visible for both the manager and the manager view.

Parameters

view	The manager view.
layer	The index of the layer.

IlBoolean IlvManager::isVisible ( const IlvGraphic * object ) const

Indicates whether a graphic object is visible.

Returns: IlTrue if the graphic object can be visible (that is, displayed at draw time by the manager), or IlFalse if the object cannot be visible.

Parameters

object The graphic object.

IlBoolean IlvManager::isVisible	(	const IlvGraphic *	g,
		IlvView *	view
	)		const

Indicates whether a graphic object is visible in a manager view.

Returns: IlTrue if the object is visible in the manager view. To be considered as visible in a view, a graphic object must be visible for the manager (see IlvManager::isVisible(const IlvGraphic*)), and the layer it is stored in must be visible in the manager view. If any of these conditions are not verified, the method returns IlFalse.

virtual IlvGraphic* IlvManager::lastContains	(	const IlvPoint &	p,
		const IlvView *	view
	)		const

virtual

Returns the graphic object containing a given point.

Parameters

p	Specifies the point in the view coordinate system.
view	The manager view.

Returns: A pointer to the object at the given location in the view. The method takes into account the stack of layers in which objects are stored. The manager returns the object on the top of the stack.

IlvGraphic* IlvManager::lastContains	(	int	layer,
		const IlvPoint &	p,
		const IlvView *	view
	)		const

Returns the graphic object containing a given point in a layer.

Parameters

layer	The index of the manager layer.
p	Specifies the point in the view coordinate system.
view	The manager view.

Returns: A pointer to the object of the manager layer at the given location in the view.

virtual void IlvManager::makeColumn	(	IlvDim	spacing = `0`,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Arranges the selected graphic objects in a column.

Builds a column by moving all the selected objects in the order in which they were selected.

Parameters

spacing	Specifies the vertical distance between objects.
redraw	Specifies whether the manager must redraw the invalidated regions occupied by the objects.

virtual void IlvManager::makeRow	(	IlvDim	spacing = `0`,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Arranges the selected graphic objects in a row.

Builds a row by moving all the selected objects in the order in which they were selected. The spacing parameter is the horizontal distance between objects.

Parameters

spacing	Specifies the horizontal distance between objects.
redraw	Specifies whether the manager must redraw the invalidated regions occupied by the objects.

virtual void IlvManager::moveLayer	(	int	from,
		int	to,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Indicates whether a layer is considered visible by the manager.

Returns: IlTrue if the layer is visible from the manager point of view. The layer may still be hidden in a manager view.

Parameters

layer The index of the layer.

void IlvManager::moveObject	(	IlvGraphic *	object,
		IlvPos	x,
		IlvPos	y,
		IlBoolean	redraw = `IlTrue`
	)

Moves a graphic object.

Moves the upper left corner of a graphic object to the specified coordinates expressed in the object coordinate system.
This member function performs a call to IlvManager::translateObject.

Parameters

object	The graphic object.
x	The new horizontal coordinate.
y	The new vertical coordinate.
redraw	Specifies whether the manager must redraw the invalidated regions occupied by the object.

IlUInt IlvManager::numberOfSelections ( ) const

Returns the number of selected graphic objects.

Returns: The number of selected objects in the manager.

IlvGraphic* const* IlvManager::objects ( IlUInt & count ) const

Returns the name of the manager.

Returns: The name of the manager.

IlvGraphic* const* IlvManager::objects	(	int	layer,
		IlUInt &	count
	)		const

Adds an object to the manager.

If an object is inserted in a non-existent layer, the layer, as well as any intermediate ones, are automatically created. For example, by default, a manager is created with three layers (0, 1 and 2); the code

addObject(obj, IlTrue, 5);

creates layers 3, 4, and 5. An object cannot be added to a manager more than once.

Parameters

object	The graphic object.
redraw	Indicates whether the manager must immediately display the object.
layer	Specifies the layer index where the object must be inserted. The default value `-1` indicates that the object is stored in the last (topmost) layer.

Warning: [note] You can accelerate the process of storing and removing objects to and from the manager. When you call IlvManager::addObject or IlvManager::removeObject, tests ensure that the data structure remains consistent. These tests ensure that an object is not stored twice, or remove an object that is not stored in this manager. You can bypass these tests and accelerate the process of storing and removing objects in a manager. See the global functions IlvGetOptimizeMode and IlvSetOptimizeMode.

virtual void IlvManager::paste	(	const IlvView *	view,
		const char *	str,
		IlvPoint &	location
	)

virtual

Reads graphic objects from a string.

Reads a set of objects from the specified string and adds them to the manager at a given location. The string may be considered as the contents of an Rogue Wave Views data file.

Parameters

view	The manager view.
str	The string containing the object descriptions.
location	Specifies, in the view coordinate system, the top-left corner of the bounding box of all the new graphic objects.

void IlvManager::pasteFromClipboard	(	const IlvView *	view,
		IlvPoint &	location
	)

Reads graphic objects from the clipboard and adds them to the manager.

Reads a set of graphic objects from the clipboard and adds them to the manager at a given location. It uses the IlvManager::paste member function.

Parameters

view	The manager view.
location	Specifies, in the view coordinate system, the top-left corner of the bounding box of all the new graphic objects.

virtual void IlvManager::pop	(	IlvGraphic *	object,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Moves a graphic object higher in the drawing stacking order.

Gives the object a higher display priority. To perform this, the manager behaves differently depending on how the object is stored:

The object is stored in a complex data structure.The object is moved to an upper layer, if there is one (otherwise, no further action is performed).
The object is stored in a list (that is, the number of the object in the layer is less than the maxInList parameter of the constructor for this manager). The object is moved to the end of the list, so that it will be displayed last.

Parameters

object	The graphic object.
redraw	Specifies whether the manager must redraw the invalidated region occupied by the object.

virtual void IlvManager::push	(	IlvGraphic *	object,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Moves a graphic object lower in the drawing stacking order.

Gives the object a lower display priority. Depending on whether the object is stored in a list or a more complex data structure (see the explanations of the member function IlvManager::pop), the object is moved to the beginning of the layer object list, or to a lower layer, if there is one.

Parameters

object	The graphic object.
redraw	Specifies whether the manager must redraw the invalidated region occupied by the object.

void IlvManager::pushInteractor ( IlvManagerViewInteractor * e )

Dispatches an event to the appropriate graphic objects.

Called by the manager event handler for every incoming user event when no view interactor was set in the view where the event occurred. It checks whether there is an object under the cursor. If there is one and if it is associated with an interactor, the event handler propagates the event to the interactor.

Returns: IlTrue if the object interactor handled the event. If there is no object under the pointer or if its object interactor cannot handle the event, the returned value is IlFalse.

virtual void IlvManager::read ( istream & stream )

virtual

Reads a set of graphic objects from the specified input stream.

The function creates an instance of IlvManagerInputFile from the stream and calls the IlvManagerInputFile::readAll member function.

Parameters

stream The input stream.

virtual void IlvManager::read ( ILVSTDPREF istream & stream )

virtual

Creates an IlvManagerInputFile from an input stream.

This method can be overloaded by subclasses, allowing them to create an IlvManagerInputFile subclass adapted to their needs.

Returns: An instance of IlvManagerInputFile, or a subclass.

Parameters

stream The input stream.

virtual void IlvManager::read ( const char * filename )

virtual

Loads an Rogue Wave Views data file.

Reads a set of graphic objects from the file named filename. The function calls the other member function IlvManager::read with a stream as argument.

Parameters

filename The file name. If it is a relative path, the file is searched for in each directory referenced in the display path.

Warning: [note] Unix platforms may not be able to correctly read files that have been generated under Windows in text mode. See the IlvManager::save member function for more information. Both the IlvEdit and Studio editors use the text mode.

virtual void IlvManager::reDo ( IlBoolean unused )

virtual

Executes again the last canceled command.

Parameters

unused This parameter is not used. It has been added to force an compilation error for the users of Views 5.1.x or previous. Because this function has been replaced by the repeat function to enable to the reDo function have the good behaviour.

void IlvManager::reDraw ( ) const

Erases all manager views and draws the contents of the manager.

Erases all the managed views and then calls the first member function IlvManager::draw.

void IlvManager::reDraw	(	const IlvGraphic *	object,
		IlBoolean	erase = `IlTrue`
	)		const

Draws a graphic object in all manager views.

Parameters

object	The graphic object.
erase	Indicates whether the object bounding box must be erased before the object is drawn.

void IlvManager::reDraw	(	IlUInt	count,
		const IlvGraphic const	objects,
		IlBoolean	erase = `IlTrue`
	)		const

Draws a set of graphic objects in all manager views.

Draws all the graphic objects of the specified array in all managed views.

Parameters

count	The number of graphic objects in the array.
objects	The array of graphic objects.
erase	Indicates whether each object bounding box must be erased before the objects are drawn.

void IlvManager::reDrawViews ( IlBoolean erase = IlTrue )

Draws the invalidated regions.

Draws the update region in all the manager views. The update region is the sum of all the areas specified in previous calls to IlvManager::invalidateRegion.

Parameters

erase Indicates whether invalidated regions must be erased before drawing.

void IlvManager::registerCallback	(	const char *	callbackName,
		IlvGraphicCallback	callback
	)

Registers a callback and its name.

Associates the user callback function with a string that will be used as its name. This string will be registered using the IlSymbol class.

Parameters

callbackName	The character string.
callback	The user function.

void IlvManager::removeAccelerator	(	IlvEventType	type,
		IlUShort	buttonOrKey = `0`,
		IlUShort	modifiers = `0`
	)

Removes the accelerator matching the event description.

Looks for an accelerator matching the event description and removes it from the manager event handler. Managers have built-in accelerators, which are listed below. You can disconnect them by setting the accelerators parameter of the manager constructor to IlFalse.

*- Predefined accelerators for managers -*
Event Type	Key or button	Action
`IlvKeyUp`	`f`	Modifies the zoom factor of the view so that all objects can be seen (f for fit)
`IlvKeyUp`	`F`	Fits and preserves ratio
`IlvKeyUp`	`i`	Sets the transformer of the view to the identity matrix.
`IlvKeyUp`	`p`	Moves selected objects to an upper layer.
`IlvKeyUp`	`P`	Moves selected objects to a deeper layer.
`IlvKeyUp`	`Ctrl-D`	Duplicates all selected objects and moves the copied object slightly.
`IlvKeyUp`	`Ctrl-A`	Selects all objects
`IlvKeyUp`	`Ctrl-S`	Selects the object designated by the pointing device.
`IlvKeyUp`	`<Del>`	Deletes all selected objects.
`IlvKeyDown`	`r`	Re-executes last command.
`IlvKeyDown`	`u`	Undoes last command.
`IlvKeyUp`	`Ctrl-G`	Groups selected objects into one.
`IlvKeyUp`	`Ctrl-U`	Ungroups an `IlvGraphicSet`.
`IlvKeyDown`	`<Right>`	Translates the view to the left.
`IlvKeyDown`	`<Left>`	Translates the view to the right.
`IlvKeyDown`	`<Down>`	Translates the view to the top.
`IlvKeyDown`	`<Up>`	Translates the view to the bottom.
`IlvKeyUp`	`Z`	Zooms into the view.
`IlvKeyUp`	`U`	Zooms out of the view.
`IlvKeyUp`	`Ctrl-B`	Deselects all objects.
`IlvKeyUp`	`Ctrl-T`	Inverts all selected objects.
`IlvKeyUp`	`Y`	Horizontally flips the selected objects.
`IlvKeyUp`	`y`	Vertically flips the selected objects.
`IlvKeyUp`	`.(dot)`	Flips the selected objects both horizontally and vertically.
`IlvKeyUp`	`Ctrl-C`	Copies selected objects into the clipboard.
`IlvKeyDown`	`Ctrl-V`	Inserts objects from the clipboard.
`IlvKeyUp`	`Ctrl-X`	Deletes selected objects but saves them into the clipboard.
`IlvKeyDown`	`R`	Rotates the view 90 degrees counter-clockwise.
`IlvKeyDown`	`C`	Centers the view on the indicated point.
`IlvKeyUp`	`T`	Encapsulates relevant object in an `IlvTransformedGraphic`.

Parameters

type	The event type.
buttonOrKey	The event data.
modifiers	The event modifiers.

void IlvManager::removeAccelerator ( IlvManagerAccelerator * )

Installs an event hook on the manager.

The last event hook installed is the first to be called when an event occurs.

Returns: IlTrue on success. If the hook is already installed on a manager, this member function does nothing and returns IlFalse.

Parameters

hook	The event hook.

void IlvManager::removeAccelerators ( )

Removes all accelerators.

This method removes all accelerators from the manager.

void IlvManager::removeCallback ( const char * callbackName )

Registers a callback and its name.

Associates the user callback function with a string that will be used as its name. This string will be registered using the IlSymbol class.

Parameters

callbackName	The character string.
callback	The user function.

void IlvManager::removeDrawHook ( IlvManagerDrawHook * hook )

Groups several graphic objects.

Creates an IlvGraphicSet object by grouping the graphic objects in the array. When objects are grouped, they lose all the manager-related information they contain (such as name, storage layer, and object interactor). You cannot retrieve this information, even when ungrouping.

Returns: The graphic set grouping the graphic objects.

Parameters

count	The number of graphic objects in the array.
objects	The array of graphic objects.

IlvManagerEventHook* IlvManager::removeEventHook ( const IlvManagerEventHook * hook )

Removes and returns an event hook installed on the manager.

You can then delete the returned value if it is no longer needed, or install the hook on another manager.

Returns: The hook if it was installed on the manager. Otherwise the returned value is 0.

Parameters

hook	The manager hook.

void IlvManager::removeInteractor ( const IlvView * view )

Removes the view interactor from a manager view.

The interactor is detached from the view. All events occuring in the view are then handled by the object interactors and accelerators (if they exist). This method removes all references to the view in the interactor.

Parameters

view	The manager view.

void IlvManager::removeLayer ( int layer = -1 )

Removes a layer from the manager.

Removes a layer from the manager and deletes all the graphic objects stored in this layer. A manager cannot have less than two layers.

Parameters

layer Indicates the index of the layer to remove. Any invalid value (such as -1 or a number greater than the number of layers) indicates that you want to remove the last (topmost) layer.

IlvManagerLayer* IlvManager::removeLayer ( IlvManagerLayer * )

Indicates whether a layer is considered visible by the manager.

Returns: IlTrue if the layer is visible from the manager point of view. The layer may still be hidden in a manager view.

Parameters

layer The index of the layer.

virtual IlBoolean IlvManager::removeObject	(	IlvGraphic *	object,
		IlBoolean	redraw = `IlTrue`,
		IlBoolean	destroyIt = `IlTrue`
	)

virtual

Removes a graphic object from the manager set.

When the object is removed from the manager, all the properties related to the manager are removed. However, the other properties (for example, the object name, its named properties, and so on) remain attached to the object itself.

Parameters

object	The graphic object.
redraw	Indicates whether the manager must immediately redraw the area occupied by the object.
destroy	Indicates whether the manager must delete the object after removing it.

Returns: IlFalse on error (the object cannot be removed) and IlTrue on success.

Warning: [note] See "Note" under the first IlvManager::addObject member function.

IlvManagerSelectionHook* IlvManager::removeSelectionHook ( const IlvManagerSelectionHook * hook )

Removes the selection hook from the manager, if it is installed.

If the hook is not installed on a manager, the member function does nothing.

Parameters

hook	The selection hook.

Returns: The specified selection hook, if it was installed, and 0 otherwise. You can delete the returned value if it is no longer needed, or install the hook on another manager.

virtual IlBoolean IlvManager::removeSmartSet ( IlvSmartSet * set )

virtual

Removes a smartset from the manager.

The objects are renamed to their intrinsic name.

Returns: IlFalse on error, that is, if the smartset is not in this manager.

Parameters

set	The smartset.

void IlvManager::removeTaggedObjects	(	const IlSymbol *	tag,
		IlBoolean	redraw = `IlTrue`
	)

Removes graphic objects associated with a given tag.

Removes from the manager all the objects associated with the specified tag.

Parameters

tag	Specifies a tag.
redraw	Specifies whether the manager must redraw the invalidated regions occupied by the objects.

virtual IlBoolean IlvManager::removeView ( IlvView * view )

virtual

Removes a view from the manager view list.

The view is no longer handled by the manager.

Parameters

view	The manager view.

Returns: IlTrue on success, and IlFalse on error (the view could not be detached).

Reimplemented in IlvGadgetManager.

void IlvManager::removeViewHook ( const IlvManagerViewHook * hook )

Removes a view hook from the manager.

Disconnects the hook from the manager view to which the hook is attached.

Parameters

hook	The manager view hook.

IlvManagerLayer* IlvManager::replaceLayer	(	IlvManagerLayer *	newLayer,
		int	index
	)

Indicates whether a layer is considered visible by the manager.

Returns: IlTrue if the layer is visible from the manager point of view. The layer may still be hidden in a manager view.

Parameters

layer The index of the layer.

virtual void IlvManager::reshapeObject	(	IlvGraphic *	object,
		const IlvRect &	bbox,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Resizes a graphic object to fit in a rectangle.

Modifies the object size so that its new bounding box becomes the specified rectangle.

Parameters

object	The graphic object.
bbox	The rectangle.
redraw	Specifies whether the manager must redraw the invalidated regions occupied by the object.

void IlvManager::rotateView	(	const IlvView *	view,
		const IlvPoint &	point,
		IlFloat	angle,
		IlBoolean	redraw = `IlTrue`
	)

Rotates the contents of a manager view.

Applies a rotation to the manager view transformer.

Parameters

view	The manager view.
point	Specifies the invariant point of the transformation.
angle	The rotation angle in degrees.
redraw	Indicates whether the manager must redraw the objects in the view after the transformation.

virtual void IlvManager::sameHeight ( IlBoolean redraw = IlTrue )

virtual

Resizes the selected graphic objects to the same height.

Makes the height of all selected objects the same as the first selected object.

Parameters

redraw Specifies whether the manager must redraw the invalidated regions occupied by the objects.

virtual void IlvManager::sameWidth ( IlBoolean redraw = IlTrue )

virtual

Resizes the selected graphic objects to the same width.

Makes the width of all selected objects the same as the first selected object.

Parameters

redraw Specifies whether the manager must redraw the invalidated regions occupied by the objects.

virtual void IlvManager::save ( ostream & stream ) const

virtual

Saves all the graphic objects in an output stream.

The function gets the graphic objects with IlvManager::getObjects, creates an instance of IlvManagerOutputFile from stream, and calls its IlvManagerOutputFile::saveAll member function.

Parameters

stream The output stream.

Warning: [note] If you are running under Windows or OS/2, and you create the stream in "text mode", Unix platforms will not be able to read the file until the carriage return character is removed by a conversion. These carriage return characters perturb the read on a Unix platform. A possible workaround is to save your data in a file that is opened in binary mode. Both the IlvEdit and Studio editors use the text mode.

virtual void IlvManager::save ( ILVSTDPREF ostream & stream ) const

virtual

Creates an IlvManagerInputFile from an input stream.

This method can be overloaded by subclasses, allowing them to create an IlvManagerInputFile subclass adapted to their needs.

Returns: An instance of IlvManagerInputFile, or a subclass.

Parameters

stream The input stream.

virtual void IlvManager::selectAll ( IlBoolean redraw = IlTrue )

virtual

Selects all the objects of the manager.

Parameters

redraw Specifies whether the manager must refresh its views.

static void IlvManager::Set	(	IlvView *	view,
		IlvManager *	manager
	)

static

Adds a view to the manager.

Attaches a new view to the manager. All events are then handled by the hierarchy of interactors located in the manager.

Parameters

view The view.

virtual void IlvManager::setBackground	(	IlvView *	view,
		IlvColor *	color,
		IlvBitmap *	bitmap = `0`
	)

virtual

Sets the background of a manager view.

Sets the color used to erase the double buffering bitmap for the view. When the view is set to double buffering mode, the color is initially updated to the background color of the view. If you change the view background color and want to set the double buffering color accordingly, call this member function with this color. If a bitmap is specified, it will be used as the background for the view; this means that it will not remain as a single image but will be tiled to the size of the manager view. To remove properly a background bitmap that was previously set, you must do the following:

view->setBackgroundBitmap(0); // Remove the background bitmap
manager->setBackground(view, view->getBackground()); // Update the manager
manager->draw(view, IlTrue); // Redraw the view

Parameters

view	The manager view.
color	The background color.
bitmap	The background bitmap.

Reimplemented in IlvGadgetManager.

void IlvManager::setCleanFunction ( IlvApplyObject func )

Sets a function to be called when an object is removed from the manager.

Parameters

func	Specifies a function to be called when an object stored in the manager is removed. This function is called with the object as the first parameter, and a user-defined parameter as a pointer to the manager. The function is called before the object is removed from the manager.

void IlvManager::setClientData ( IlAny data )

Groups several graphic objects.

Creates an IlvGraphicSet object by grouping the graphic objects in the array. When objects are grouped, they lose all the manager-related information they contain (such as name, storage layer, and object interactor). You cannot retrieve this information, even when ungrouping.

Returns: The graphic set grouping the graphic objects.

Parameters

count	The number of graphic objects in the array.
objects	The array of graphic objects.

void IlvManager::setCreatorPalette ( IlvPalette * palette )

Sets the default palette used to create new graphic objects interactively.

Parameters

palette The palette.

IlBoolean IlvManager::setDoubleBuffering	(	const IlvView *	view,
		IlBoolean	useDB,
		IlBoolean	tmp = `IlFalse`
	)

Enables or disables double buffering for a manager view.

Returns: IlFalse if the view is not handled by the manager, or if useDB is set to IlTrue and the double buffering bitmap associated with view is not valid. Otherwise, it returns IlTrue.

Parameters

view	The manager view.
useDB	`IlTrue` to enable double buffering and `IlFalse` to disable it.
tmp	Not documented

void IlvManager::setDoubleBufferingColor ( IlvColor * color )

Enables or disables double buffering for a manager view.

Returns: IlFalse if the view is not handled by the manager, or if useDB is set to IlTrue and the double buffering bitmap associated with view is not valid. Otherwise, it returns IlTrue.

Parameters

view	The manager view.
useDB	`IlTrue` to enable double buffering and `IlFalse` to disable it.
tmp	Not documented

void IlvManager::setDoubleBufferingHandler ( IlvManagerDblBufferHandler * )

Enables or disables double buffering for a manager view.

Returns: IlFalse if the view is not handled by the manager, or if useDB is set to IlTrue and the double buffering bitmap associated with view is not valid. Otherwise, it returns IlTrue.

Parameters

view	The manager view.
useDB	`IlTrue` to enable double buffering and `IlFalse` to disable it.
tmp	Not documented

void IlvManager::setEditable	(	IlvGraphic *	object,
		IlBoolean	editable
	)

Indicates whether a graphic object can be edited.

Parameters

object	The graphic object.
editable	`IlTrue` to set the object as editable and `IlFalse` otherwise.

IlvEditableFilter* IlvManager::setEditableFilter ( IlvEditableFilter * )

Adds an object to the manager.

If an object is inserted in a non-existent layer, the layer, as well as any intermediate ones, are automatically created. For example, by default, a manager is created with three layers (0, 1 and 2); the code

addObject(obj, IlTrue, 5);

creates layers 3, 4, and 5. An object cannot be added to a manager more than once.

Parameters

object	The graphic object.
redraw	Indicates whether the manager must immediately display the object.
layer	Specifies the layer index where the object must be inserted. The default value `-1` indicates that the object is stored in the last (topmost) layer.

Warning: [note] You can accelerate the process of storing and removing objects to and from the manager. When you call IlvManager::addObject or IlvManager::removeObject, tests ensure that the data structure remains consistent. These tests ensure that an object is not stored twice, or remove an object that is not stored in this manager. You can bypass these tests and accelerate the process of storing and removing objects in a manager. See the global functions IlvGetOptimizeMode and IlvSetOptimizeMode.

void IlvManager::setGrid	(	IlvView *const	view,
		IlvManagerGrid *	grid
	)

Sets a manager grid on a manager view.

The grid already existing is disconnected, but not deleted.

Parameters

view	The manager view.
grid	The manager grid. `0` is specified to disconnect the view from the current grid.

void IlvManager::setInsertionLayer ( int layer = -1 )

Sets the layer where new objects created interactively using the predefined interactors will be stored.

Parameters

layer The index of the layer.

void IlvManager::setInteractor	(	IlvManagerViewInteractor *	i,
		const IlvView *	view = `0`
	)

Sets a view interactor on a manager view.

If the view is different from the one that was used when creating the interactor, you must first detach the interactor by using IlvManager::removeInteractor.

Parameters

i	The view interactor. `0` is not a valid value (use `IlvManager::removeInteractor` to detach an interactor from a view).
view	The manager view. If `0` is specified, the method uses the view used to create the interactor.

void IlvManager::setKeepingAspectRatio	(	const IlvView *	view,
		IlBoolean	ratio = `IlTrue`,
		IlBoolean	redraw = `IlTrue`
	)		const

Sets or unsets the automatic preservation of the x/y ratio in a manager view.

If you request that the aspect ratio be kept, and if the view transformer does not respect this ratio, the transformer will be recomputed accordingly.

Parameters

view	The manager view.
ratio	Set to `IlTrue` to respect the x/y ratio and `IlFalse` otherwise.
redraw	Indicates whether the manager must redraw the objects in the view if the transformer is changed.

void IlvManager::setLayer	(	IlvGraphic *	object,
		int	layer,
		IlBoolean	redraw = `IlTrue`
	)

Moves a graphic object to a given manager layer.

Moves a graphic object from its original manager layer to the specified manager layer.

Parameters

object	The graphic object.
layer	The index of the destination manager layer.
redraw	Specifies whether the manager must redraw the invalidated region occupied by the object.

IlvMakeSelection IlvManager::setMakeSelection ( IlvMakeSelection func )

Sets the function that creates a selection object for a graphic object.

Changes the function called to create the graphic object that represents the selection of an object. The function func is called when an object becomes selected. The function receives a pointer to this manager, and a pointer to the object itself. It then creates a selection object (a subtype of the IlvDrawSelection graphic class) and returns a pointer to the object. This object is entirely managed by Rogue Wave Views, and removed when finished with.
The default behavior of a manager is to create an IlvDrawSelection instance (one having eight square handles) that fits the object bounding box. However, you may need to have another type of selection object. To create this new type of selection object, subtype the IlvDrawSelection class and create a function that instantiates this class depending of the type of the graphic object selected. This function is the parameter to the IlvManager::setMakeSelection member function.

Returns: The previous function used by the manager.

Parameters

func	The new selection function.

Warning: [note] A better way to customize the selection objects is to use the IlvSelectionInterface class. It allows you to associate different subclasses of IlvDrawSelection with different subclasses of IlvGraphic.

See Also: IlvSelectionInterface

IlvManagerLayerFactory* IlvManager::setManagerLayerFactory ( IlvManagerLayerFactory * )

Indicates whether a layer is considered visible by the manager.

Returns: IlTrue if the layer is visible from the manager point of view. The layer may still be hidden in a manager view.

Parameters

layer The index of the layer.

void IlvManager::setModified ( IlBoolean value )

Sets the modification status of the manager.

Parameters

value IlTrue to set the manager status as modified, IlFalse to unset it.

void IlvManager::setMoveable	(	IlvGraphic *	object,
		IlBoolean	moveable
	)

Sets the moveability of a graphic object.

Parameters

object	The graphic object.
moveable	`IlTrue` to set the object as moveable, and `IlFalse` otherwise.

virtual void IlvManager::setName ( const char * name )

virtual

Sets the name of the manager.

Parameters

name	The new name. The string is copied.

void IlvManager::setNumLayers ( int numLayers )

Sets the number of manager layers.

Sets the number of layers handled by the manager to the specified value. Although there is no limit to the number of layers allowed, having a large number of layers is not recommended for reasons of efficiency. The maximum should probably not exceed 100 to 200 layers. You can use this method to add layers, but not to remove them.

Parameters

numLayers The number of layers.

IlBoolean IlvManager::setObjectInteractor	(	IlvGraphic *	object,
		IlvManagerObjectInteractor *	i
	)

Sets an object interactor on a graphic object.

If an interactor is already set on this object, it is replaced but not deleted. This way you can use it with other objects.

Returns: IlTrue if the interactor is properly associated with the object (that is, the interactor accepts the connection to the object). Otherwise, the returned value is IlFalse.

Parameters

object	The graphic object.
i	The object interactor.

virtual IlBoolean IlvManager::setObjectName	(	IlvGraphic *	object,
		const char *	name
	)

virtual

Sets the name of a graphic object in the manager.

Object names must be unique in a given manager. Trying to give the same name to two different objects results in an error and the function returns IlFalse. You can rename an object by calling IlvManager::setObjectName with a different string, or you can delete an object name by setting its name to 0 when calling the function. An attempt to erase the name of an unnamed object is considered to be an error.

Parameters

object	The graphic object.
name	The name to set on the graphic object.

Returns: IlTrue on success, and IlFalse on failure.

void IlvManager::setReDrawMode ( IlvReDrawMode reDrawMode )

Sets the redraw mode of the manager.

The redraw mode determines the way the manager redraws objects after a call to a method modifying objects, such as IlvManager::applyToObjects or changeValues.

Parameters

reDrawMode Can only take the value IlvReDrawAll or IlvReDrawObjects. IlvReDrawAll indicates that all the objects of the manager intersecting the region enclosing the modified objects are redrawn. This is the default mode. IlvReDrawObjects indicates that only modified objects must be redrawn (for example, the objects passed to IlvManager::applyToObjects).

void IlvManager::setResizeable	(	IlvGraphic *	object,
		IlBoolean	resizable
	)

Sets a graphic object as resizable or not resizable.

Parameters

object	The graphic object.
resizable	`IlTrue` to set the object as resizable, and `IlFalse` otherwise.

void IlvManager::setSelectable	(	int	layer,
		IlBoolean	selectable
	)

Enables or disables the selection of graphic objects in a manager layer.

Sets the selectable attribute of the layer to the value of the selectable parameter.

Parameters

layer	The index of the manager view.
selectable	`IlTrue` to enable the selection in the layer, and `IlFalse` to disable it.

virtual void IlvManager::setSelectable	(	IlvGraphic *	object,
		IlBoolean	selectable
	)

virtual

Sets a graphic object as selectable or not selectable.

Sets the selectable attribute of the object object to the value of selectable.

Parameters

object	The graphic object.
selectable	`IlTrue` to set the object as selectable, and `IlFalse` otherwise.

virtual void IlvManager::setSelected	(	IlvGraphic *	object,
		IlBoolean	selected = `IlTrue`,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Selects or deselects a graphic object.

Selects or deselects an object in the manager.

Parameters

object	The graphic object.
selected	`IlTrue` if the graphic object must be selected, `IlFalse` otherwise.
redraw	Specifies whether the manager must redraw the invalidate region occupied by the selection object.

Reimplemented in IlvGadgetManager.

void IlvManager::setTaggedObjectsSelected	(	const IlSymbol *	tag,
		IlBoolean	selected = `IlTrue`,
		IlBoolean	redraw = `IlTrue`
	)

Selects or deselects the graphic objects associated with a given tag.

Sets the selected state of the objects associated with the specified tag.

Parameters

tag	Specifies a tag.
selected	Indicates whether the graphic objects must be selected.
redraw	Specifies whether the manager must redraw the invalidated regions occupied by the selection objects.

virtual void IlvManager::setTransformer	(	const IlvView *	view,
		IlvTransformer *	t = `0`
	)

virtual

Sets a transformer to a manager view.

Associates a transformer to a manager view. The transformer will be used to draw the graphic objects in this view. The transformer is internally copied during this function call.

Parameters

view	The manager view.
t	The transformer.

void IlvManager::setUndoEnabled ( IlBoolean enable )

Enables or disables the possibility of undoing commands in the manager.

Parameters

enable IlFalse to disable Undo, IlTrue to enable it (this is the default state of the manager).

void IlvManager::setVisible	(	int	layer,
		IlBoolean	visible
	)

Sets the visibility of a layer for the manager.

Sets the visibility attribute of a layer from the manager perspective.

Parameters

layer	The manager layer.
visible	`IlTrue` to set the layer as visible.

void IlvManager::setVisible	(	const IlvView *	view,
		int	layer,
		IlBoolean	visible
	)

Sets the visibility of a layer for a manager view.

Sets the visibility attribute of a layer from the perspective of a manager view.

Parameters

view	The manager view.
layer	The index of the layer.
visible	`IlTrue` to set the layer as visible.

void IlvManager::setVisible	(	IlvGraphic *	object,
		IlBoolean	visible,
		IlBoolean	redraw = `IlFalse`
	)

Sets the visibility of a graphic object in the manager to visible. The method calls the IlvManagerViewHook::contentsChanged member function of the hook objects that are linked to the manager. This member function does not redraw the bounding box of the object.

Parameters

object	The graphic object.
visible	`IlTrue` to set the object as visible, and `IlFalse` to make it invisible.
redraw	Specifies whether the manager must redraw its contents.

virtual IlBoolean IlvManager::shortCut	(	IlvEvent &	event,
		IlvView *	view
	)

virtual

Dispatches an incoming event to manager accelerators.

Called when IlvManager::dispatchToObjects has returned IlFalse. It is typically called by the member function of the view interactors IlvManagerViewInteractor::handleEvent, when these interactors cannot parse the incoming events. The function checks whether the event triggers one of the accelerators stored in the manager (see IlvAccelerator::trigger).

Returns: IlTrue if a matching accelerator is found; the accelerator action is then called. If no matching accelerator is found, IlFalse is returned.

Parameters

event	The incoming event.
view	The manager view.

void IlvManager::snapToGrid	(	const IlvView *	view,
		IlvPoint &	p
	)		const

Moves a given point to the closest grid point on a manager view.

If no grid is currently associated with the view, the point is not modified.

Parameters

view	The manager view.
p	Specifies the point in the view coordinate system. This parameter is modified to hold the return value, which is also expressed in the view coordinate system.

IlvGraphic* const* IlvManager::sortObjects	(	IlvGraphic const	objs,
		IlUInt	count
	)		const

Sorts a set of object.

The objects are sorted by redraw order.

Parameters

objs	The objects array which must be sorted.
count	The object count of the array.

Returns: An array of pointers to the sorted objects. The array is stored in an IlPoolOf(Pointer) and should not be deleted or modified.

void IlvManager::swapLayers	(	int	layer1,
		int	layer2,
		IlBoolean	redraw = `IlTrue`
	)

Swaps the contents of two manager layers.

The objects originally in layer1 are moved to layer2, and the objects originally in layer2 are moved to layer1.

Parameters

layer1	The index of a manager layer.
layer2	The index of another manager layer.
redraw	Specifies whether the manager must redraw the invalidated regions occupied by the objects.

IlBoolean IlvManager::transformThroughGrid	(	const IlvView *	view,
		IlvPoint &	p
	)		const

Transforms and moves a given point on a manager view to the closest grid point in the manager coordinate system.

The point given in parameter is first transformed in the manager coordinate system, and then snapped to the grid of the manager view. If no grid is currently associated with the view, the point is not snapped to the grid but just converted in the manager coordinate system.

Parameters

view	The manager view.
p	Specifies the point in the view coordinate system. This parameter is modified to hold the return value, which is expressed in the coordinate system of the manager.

Returns: IlFalse if the view is not associated with the manager, otherwise IlTrue.

virtual void IlvManager::translateObject	(	IlvGraphic *	object,
		IlvPos	dx,
		IlvPos	dy,
		IlBoolean	redraw = `IlTrue`
	)

virtual

Translates a graphic object.

Translates the upper left corner of a graphic object by the specified offsets expressed in the object coordinate system.

Parameters

object	The graphic object.
dx	The horizontal translation offset.
dy	The vertical translation offset.
redraw	Specifies whether the manager must redraw the invalidated regions occupied by the object.

void IlvManager::translateView	(	const IlvView *	view,
		IlvPos	dx,
		IlvPos	dy,
		IlBoolean	redraw = `IlTrue`
	)

Scroll the contents of a manager.

Applies a translation to the manager view transformer to scroll the graphic objects.

Parameters

view	The manager view.
dx	Translation along the horizontal axis.
dy	Translation along the vertical axis.
redraw	Indicates whether the manager must redraw the objects in the view after the transformation.

virtual void IlvManager::unGroup	(	IlvGraphic *	object,
		IlBoolean	undoCommand = `IlTrue`
	)

virtual

Ungroups the graphic objects of a graphic set.

Ungroups an IlvGraphicSet. The objects keep the same position and shape they have when they are ungrouped.

Parameters

object	The graphic set. If it is not a subclass of `IlvGraphicSet`, nothing is done.
undoCommand	`IlFalse` indicates that you do not want to store this action in the command stack of the manager.

void IlvManager::unregisterCallback ( const char * callbackName )

Removes the callback function registered with the specified name from the callback list.

Parameters

callbackName The callback name.

virtual void IlvManager::viewResized	(	const IlvView *	,
		IlvRect &
	)

virtual

Groups several graphic objects.

Creates an IlvGraphicSet object by grouping the graphic objects in the array. When objects are grouped, they lose all the manager-related information they contain (such as name, storage layer, and object interactor). You cannot retrieve this information, even when ungrouping.

Returns: The graphic set grouping the graphic objects.

Parameters

count	The number of graphic objects in the array.
objects	The array of graphic objects.

Reimplemented in IlvGadgetManager.

IlvDrawSelection* IlvManager::whichSelection	(	const IlvPoint &	p,
		const IlvView *	view
	)		const

Returns the selection object located at the given location.

Accomplishes the same task as the IlvManager::lastContains member function but only on selected objects. It is generally used to get the selected object located at the cursor location.

Returns: The selection object at the specified location, or 0 if there is none.

Parameters

p	The point, in the coordinate system of the view.
view	The manager view.

void IlvManager::zoomView	(	const IlvView *	view,
		const IlvPoint &	point,
		IlFloat	scalex,
		IlFloat	scaley,
		IlBoolean	redraw = `IlTrue`
	)

Zoom the contents of a manager view.

Applies a zooming factor to the manager view transformer.

Parameters

view	The manager view.
point	Specifies the invariant point of the transformation.
scalex	Zooming factor on the horizontal axis.
scaley	Zooming factor on the vertical axis.
redraw	Indicates whether the manager must redraw the objects in the view after the transformation.

Rogue Wave ViewsManager Package API Reference Guide

Public Member Functions

Binding Views to a Manager

Object Properties

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Event Type

Key or button

Action

Rogue Wave Views
Manager Package API Reference Guide