IlvAnnealingPolylineLabelDescriptor (Rogue Wave JViews 9.2 API)

java.lang.Object
- ilog.views.graphlayout.labellayout.annealing.IlvAnnealingLabelDescriptor
- - ilog.views.graphlayout.labellayout.annealing.IlvAnnealingPolylineLabelDescriptor

All Implemented Interfaces:

IlvPersistentObject, Serializable
```
public class IlvAnnealingPolylineLabelDescriptor
extends IlvAnnealingLabelDescriptor
implements IlvPersistentObject
```
The class IlvAnnealingPolylineLabelDescriptor can be used to specify that the label should be placed close to a polyline (the polyline labeling problem). A typical application is to place labels of roads on a map. The roads can be represented by polylines. The labels should be close to the related roads, but they should not overlap each other and should not overlap any road.
The following are two sample drawings that show link/line labeling with polyline label descriptors. In the left drawing, the "Start Label", "End Label" and "Center Label" were anchored at the start, end, center, respectively, of the corresponding link. The right drawing shows a link with multiple labels that have the right side in local side association specified as allowed side.
Click on the image to see it in normal size.

Since:

JViews 5.0

See Also:

Serialized Form

Field Summary

Fields
Modifier and Type	Field and Description
`static int`	`CENTER` Option for the label anchor.
`static int`	`END` Option for the label anchor.
`static int`	`FREE` Option for the label anchor.
`static int`	`GLOBAL` Option for the side association.
`static int`	`LOCAL` Option for the side association.
`static int`	`START` Option for the label anchor.

Fields inherited from class ilog.views.graphlayout.labellayout.annealing.IlvAnnealingLabelDescriptor
actDistFromPath, actPathLocation, IGNORED, LABEL, maxDistFromPath, maxPathLocation, OBSTACLE

Constructor Summary

Constructors
Constructor and Description
`IlvAnnealingPolylineLabelDescriptor()` Creates a new empty instance of a polyline label descriptor.
`IlvAnnealingPolylineLabelDescriptor(IlvAnnealingPolylineLabelDescriptor d)` Creates a copy of a label descriptor.
`IlvAnnealingPolylineLabelDescriptor(IlvInputStream stream)` Creates a new `IlvAnnealingPolylineLabelDescriptor` from an `IlvInputStream`.
`IlvAnnealingPolylineLabelDescriptor(Object label, IlvLinkImage link, int anchor)` Creates a new instance of a polyline link label descriptor.
`IlvAnnealingPolylineLabelDescriptor(Object lbl, Object relObstacle, IlvPoint[] refPoints, double linw, double minPercFromStart, double maxPercFromStart, double prefPercFromStart, double maxDist, double prefDist, int prefSide, int allowSide, int sideAssoc, double top, double bottom, double left, double right)` Creates a new instance of a polyline label descriptor.
`IlvAnnealingPolylineLabelDescriptor(Object label, Object relatedObstacle, IlvPoint[] referencePoints, double lineWidth, double minPercentageFromStart, double maxPercentageFromStart, double maxDistFromPath, double preferredDistFromPath, int preferredSide, int allowedSide, int sideAssociation, double topOverlap, double bottomOverlap, double leftOverlap, double rightOverlap)` Creates a new instance of a polyline label descriptor.
`IlvAnnealingPolylineLabelDescriptor(Object label, Object relatedObstacle, int anchor, int preferredSide, int allowedSide, int sideAssociation)` Creates a new instance of a polyline label descriptor.
`IlvAnnealingPolylineLabelDescriptor(Object label, Object link, Object source, Object target, int anchor, double maxDistFromLink, double preferredDistFromLink, int preferredSide, int allowedSide, int sideAssociation, double topOverlap, double bottomOverlap, double leftOverlap, double rightOverlap)` Creates a new instance of a polyline link label descriptor.

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method and Description
`boolean`	`considerObstacle(Object obstacle)` Returns `true` if the overlap between the label and the input obstacle should be considered during the quality calculation of the Simulated Annealing label layout algorithm.
`IlvAnnealingLabelDescriptor`	`copy()` Returns a copy of this label descriptor.
`int`	`getAllowedSide()` Returns the allowed side where the label is placed.
`int`	`getAnchor()` Returns the anchor of the label.
`double`	`getBottomOverlap()` Returns the amount the label can overlap the related obstacle or reference polyline at the bottom side of the label.
`double`	`getLeftOverlap()` Returns the amount the label can overlap the related obstacle or reference polyline at the left side of the label.
`double`	`getLineWidth()` Returns the specified line width of the polyline given by the reference points.
`double`	`getMaxDistFromPath()` Returns the maximum distance from the location on the path.
`double`	`getMaxPercentageFromStart()` Returns the percentage relative to the length of the polyline that defines the end point of the area of the polyline that should be used for the label.
`protected double`	`getMinDist(Object obstacle, double min)` Returns the minimum distance value between this label and the input obstacle.
`double`	`getMinPercentageFromStart()` Returns the percentage relative to the length of the polyline that defines the start point of the area of the polyline that should be used for the label.
`double`	`getPreferredDistFromPath()` Returns the preferred distance from the location on the path.
`double`	`getPreferredPathLocation()` Returns the preferred location on the path.
`double`	`getPreferredPercentageFromStart()` Returns the percentage relative to the length of the polyline that defines the preferred position for the label.
`int`	`getPreferredSide()` Returns the preferred side where the label is placed.
`IlvPoint[]`	`getReferencePoints()` Returns a copy of the specified reference points that define the polyline where the label must be placed.
`Object`	`getRelatedObstacle()` Returns the obstacle that is related to the label.
`Object`	`getRelatedObstacleSource()` Returns the source node if the related obstacle is a link.
`Object`	`getRelatedObstacleTarget()` Returns the target node if the related obstacle is a link.
`double`	`getRightOverlap()` Returns the amount the label can overlap the related obstacle or reference polyline at the right side of the label.
`int`	`getSideAssociation()` Returns the side association of the label.
`double`	`getTopOverlap()` Returns the amount the label can overlap the related obstacle or reference polyline at the top side of the label.
`void`	`initialize(IlvLabelingModel labelingModel)` Initializes the label descriptor before layout.
`void`	`setAllowedSide(int side)` Sets the allowed side where the label is placed.
`void`	`setAnchor(int anchor)` Sets the anchor of the label.
`void`	`setBottomOverlap(double overlap)` Sets the amount the label can overlap the related obstacle or reference polyline at the bottom side of the label.
`void`	`setLeftOverlap(double overlap)` Sets the amount the label can overlap the related obstacle or reference polyline at the left side of the label.
`void`	`setLineWidth(double lineWidth)` Sets the line width of the polyline given by the reference points.
`void`	`setMaxDistFromPath(double distance)` Sets the maximum distance from the location on the path.
`void`	`setMaxPercentageFromStart(double maxPercentage)` Sets the percentage relative to the length of the polyline that defines the end point of the area of the polyline that should be used for the label.
`void`	`setMinPercentageFromStart(double minPercentage)` Sets the percentage relative to the length of the polyline that defines the start point of the area of the polyline that should be used for the label.
`void`	`setPosition(double pathLocation, double distFromPath)` Sets the label conceptually to the specified position.
`void`	`setPreferredDistFromPath(double distance)` Sets the preferred distance from the location on the path.
`void`	`setPreferredPercentageFromStart(double prefPercentage)` Sets the percentage relative to the length of the polyline that defines the preferred position for the label.
`void`	`setPreferredSide(int side)` Sets the preferred side where the label is placed.
`void`	`setReferencePoints(IlvPoint[] points)` Sets the reference points that define the polyline where the label must be placed.
`void`	`setRelatedObstacle(Object obstacle)` Sets the obstacle that is related to the label.
`void`	`setRelatedObstacleSource(Object source)` Sets the source node if the related obstacle is a link.
`void`	`setRelatedObstacleTarget(Object target)` Sets the target node if the related obstacle is a link.
`void`	`setRightOverlap(double overlap)` Sets the amount the label can overlap the related obstacle or reference polyline at the right side of the label.
`void`	`setSideAssociation(int association)` Sets the side association of the label.
`void`	`setTopOverlap(double overlap)` Sets the amount the label can overlap the related obstacle or reference polyline at the top side of the label.
`void`	`setTowardsPreferredPosition(double pathLocation, double distFromPath, int i, int maxI)` Sets the label to a position that is closer to the preferred position than the input position given by `pathLocation` and `distFromPath`.
`void`	`write(IlvOutputStream stream)` Writes the label descriptor to the output stream.

Methods inherited from class ilog.views.graphlayout.labellayout.annealing.IlvAnnealingLabelDescriptor
getActDistFromPath, getActPathLocation, getLabel, getMaxPathLocation, getRotation, getTreatAs, isAutoCorrect, isFixed, setActDistFromPath, setActPathLocation, setAutoCorrect, setFixed, setMaxPathLocation, setTreatAs, updatePosition

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - LOCAL
```
public static final int LOCAL
```
    Option for the side association. The side association defines the meaning of left, right, top and bottom on the polyline. With the local side association, a polyline has two sides: left and right. These sides are relative to the flow direction of the polyline from start to end.
    Compare the polyline with a road: at any point of the road, you can determine the left and right side of the road by looking away from the start into the direction where the road continues towards the end of the road. Notice that if you have an object (e.g. a city) at the left side and the road makes a sharp bend by 180 degree, the object after the bend appear at the right side. Hence, the meaning of left and right is local to the road, not global like a compass direction.
    
    See Also:
    
    Constant Field Values
  - GLOBAL
```
public static final int GLOBAL
```
    Option for the side association. The side association defines the meaning of left, right, top and bottom on the polyline. With the global side association, the left side is towards the smaller x-coordinates, the right side towards the larger x-coordinates, the top side towards the smaller y-coordinates, the bottom side towards the larger y coordinates.
    In this case, the meaning of the sides is globally defined, like the compass directions. It is independent from the flow direction of the polyline line segments. If you compare it with a map of roads, then left is towards the west direction of the map, right is towards the east direction of the map, top is towards the north direction and bottom is the towards the south direction of the map.
    
    See Also:
    
    Constant Field Values
  - CENTER
```
public static final int CENTER
```
    Option for the label anchor. The label is placed near the center of the polyline.
    
    See Also:
    
    Constant Field Values
  - START
```
public static final int START
```
    Option for the label anchor. The label is placed near the start of the polyline.
    
    See Also:
    
    Constant Field Values
  - END
```
public static final int END
```
    Option for the label anchor. The label is placed near the end of the polyline.
    
    See Also:
    
    Constant Field Values
  - FREE
```
public static final int FREE
```
    Option for the label anchor. The label has no anchor. It can be placed everywhere at the polyline.
    
    See Also:
    
    Constant Field Values
- Constructor Detail
  - IlvAnnealingPolylineLabelDescriptor
```
public IlvAnnealingPolylineLabelDescriptor()
```
    Creates a new empty instance of a polyline label descriptor. You have to fill the label descriptor with data before you can use the descriptor in the label layout. As a minimum, you have to specify either a related obstacle, or the reference points and the line width.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    setRelatedObstacle(Object), setReferencePoints(IlvPoint[]), setLineWidth(double), setMinPercentageFromStart(double), setMaxPercentageFromStart(double), setPreferredPercentageFromStart(double), setMaxDistFromPath(double), setPreferredDistFromPath(double), setPreferredSide(int), setAllowedSide(int), setSideAssociation(int), setTopOverlap(double), setBottomOverlap(double), setLeftOverlap(double), setRightOverlap(double), IlvAnnealingLabelLayout.setLabelDescriptor(Object, IlvAnnealingLabelDescriptor)
  - IlvAnnealingPolylineLabelDescriptor
```
public IlvAnnealingPolylineLabelDescriptor(Object label,
                                           Object relatedObstacle,
                                           int anchor,
                                           int preferredSide,
                                           int allowedSide,
                                           int sideAssociation)
```
    Creates a new instance of a polyline label descriptor. This can be used to describe that the label can move along a polyline obstacle. The label layout algorithm tries to place the label close, but not overlapping, to the polyline.
    The label is anchored at the polyline obstacle. Valid options for the anchor are:
    - CENTER - The label is placed near the center of the polyline.
    - START - The label is placed closer to the start point of the polyline.
    - END - The label is placed closer to the end point of the polyline.
    - FREE - The label is placed anywhere at the polyline.
    The label is placed at the allowed side of the polyline. Furthermore, the layout takes as hint the distance and side where the label should be preferably placed.
    
    The meaning of the parameters allowedSide and preferredSide depends on the side association. Valid options for the side association are:
    - LOCAL - sides are specified local to the flow direction of the polyline.
    - GLOBAL - sides are specified relative to the global coordinates.
    If the side association is LOCAL, the following options can be used to specify the allowed and preferred sides:
    - IlvDirection.Left - left side in polyline flow direction.
    - IlvDirection.Right - right side in polyline flow direction.
    If the side association is GLOBAL, the following options can be used to specify the allowed and preferred sides:
    - IlvDirection.Left - left side.
    - IlvDirection.Right - right side.
    - IlvDirection.Top - top side.
    - IlvDirection.Bottom - bottom side.
    - IlvDirection.TopLeft - top side or left side.
    - IlvDirection.TopRight - top side or right side.
    - IlvDirection.BottomLeft - bottom side or left side.
    - IlvDirection.BottomRight - bottom side or right side.
    Normally, the allowed side specification is strictly obeyed while the preferred side specification is only a recommendation for the layout algorithm. If multiple labels are placed at the same related obstacle, the allowed side is respected for all of them while usually only the first few labels can be placed at the preferred side of the related obstacle. In side association GLOBAL, it may happen that the allowed side specification is impossible. For instance, a strictly horizontal line has a top and a bottom side, but is not considered to have a left and right side. Therefore, to allow only the left or right side of this line cannot be obeyed.
    Parameters:
    
    label - The label.
    
    relatedObstacle - The obstacle that is related to the label. The points of the polyline are retrieved from the related obstacle. It must be a polyline obstacle in the labeling model.
    
    anchor - The anchor of the label.
    
    preferredSide - The preferred side where the label should be placed.
    
    allowedSide - The sides that are allowed for the label, or 0, if all sides are allowed.
    
    sideAssociation - The association for the preferred and allowed side.
    
    See Also:
    
    IlvAnnealingLabelLayout.setLabelDescriptor(java.lang.Object, ilog.views.graphlayout.labellayout.annealing.IlvAnnealingLabelDescriptor), IlvLabelingModel.isPolylineObstacle(java.lang.Object), LOCAL, GLOBAL
  - IlvAnnealingPolylineLabelDescriptor
```
public IlvAnnealingPolylineLabelDescriptor(Object label,
                                           IlvLinkImage link,
                                           int anchor)
```
    Creates a new instance of a polyline link label descriptor. This special constructor should be used only if the label should be placed along a polyline link in the default labeling model. The label layout algorithm tries to place the label close, but not overlapping, to the link.
    The label is anchored at the polyline link. Valid options for the anchor are:
    - CENTER - The label is placed near the center of the link.
    - START - The label is placed closer to the source of the link.
    - END - The label is placed closer to the destination of the link.
    - FREE - The label is placed anywhere at the link.
    Parameters:
    
    label - The label.
    
    link - The link. It must be a polyline obstacle in the labeling model.
    
    anchor - The anchor of the label.
    
    See Also:
    
    IlvAnnealingLabelLayout.setLabelDescriptor(java.lang.Object, ilog.views.graphlayout.labellayout.annealing.IlvAnnealingLabelDescriptor), IlvLabelingModel.isPolylineObstacle(java.lang.Object), IlvLabelingModel.isObstacle(java.lang.Object), IlvLinkImage, IlvDefaultLabelingModel
  - IlvAnnealingPolylineLabelDescriptor
```
public IlvAnnealingPolylineLabelDescriptor(Object label,
                                           Object link,
                                           Object source,
                                           Object target,
                                           int anchor,
                                           double maxDistFromLink,
                                           double preferredDistFromLink,
                                           int preferredSide,
                                           int allowedSide,
                                           int sideAssociation,
                                           double topOverlap,
                                           double bottomOverlap,
                                           double leftOverlap,
                                           double rightOverlap)
```
    Creates a new instance of a polyline link label descriptor. This special constructor should be used only if the label should be placed along a polyline link. The label layout algorithm tries to place the label close, but not overlapping, to the link.
    The label is anchored at the polyline link. Valid options for the anchor are:
    - CENTER - The label is placed near the center of the link.
    - START - The label is placed closer to the source of the link.
    - END - The label is placed closer to the destination of the link.
    - FREE - The label is placed anywhere at the link.
    The label is placed at the allowed side of the link. Furthermore, the layout takes as hint the distance and side where the label should be preferably placed.
    
    The meaning of the parameters allowedSide and preferredSide depends on the side association. Valid options for the side association are:
    - LOCAL - sides are specified local to the flow direction of the link.
    - GLOBAL - sides are specified relative to the global coordinates.
    If the side association is LOCAL, the following options can be used to specify the allowed and preferred sides:
    - IlvDirection.Left - left side in link flow.
    - IlvDirection.Right - right side in link flow.
    If the side association is GLOBAL, the following options can be used to specify the allowed and preferred sides:
    - IlvDirection.Left - left side.
    - IlvDirection.Right - right side.
    - IlvDirection.Top - top side.
    - IlvDirection.Bottom - bottom side.
    - IlvDirection.TopLeft - top side or left side.
    - IlvDirection.TopRight - top side or right side.
    - IlvDirection.BottomLeft - bottom side or left side.
    - IlvDirection.BottomRight - bottom side or right side.
    Normally, the allowed side specification is strictly obeyed while the preferred side specification is only a recommendation for the layout algorithm. If multiple labels are placed at the same link the allowed side is respected for all of them while usually only the first few labels can be placed at the preferred side of the link. In side association GLOBAL, it may happen that the allowed side specification is impossible. For instance, a strictly horizontal link has a top and a bottom side, but no left and right side (because at the left and right side are the end nodes of the link, where the label should not be placed). Therefore, to allow only the left or right side of this link cannot be obeyed.
    Parameters:
    
    label - The label.
    
    link - The link. It must be a polyline obstacle in the labeling model.
    
    source - The source node. It must be an obstacle in the labeling model.
    
    target - The target node. It must be an obstacle in the labeling model.
    
    anchor - The anchor of the label.
    
    maxDistFromLink - The maximum distance the label is allowed to be placed away from the link.
    
    preferredDistFromLink - The preferred distance the label is placed away from the link.
    
    preferredSide - The preferred side where the label should be placed.
    
    allowedSide - The sides that are allowed for the label, or 0, if all sides are allowed.
    
    sideAssociation - The association for the preferred and allowed side.
    
    topOverlap - The amount the label can overlap the link at the top side of the label.
    
    bottomOverlap - The amount the label can overlap the link at the bottom side of the label.
    
    leftOverlap - The amount the label can overlap the link at the left side of the label.
    
    rightOverlap - The amount the label can overlap the link at the right side of the label.
    
    See Also:
    
    IlvAnnealingLabelLayout.setLabelDescriptor(java.lang.Object, ilog.views.graphlayout.labellayout.annealing.IlvAnnealingLabelDescriptor), IlvLabelingModel.isPolylineObstacle(java.lang.Object), IlvLabelingModel.isObstacle(java.lang.Object), LOCAL, GLOBAL
  - IlvAnnealingPolylineLabelDescriptor
```
public IlvAnnealingPolylineLabelDescriptor(Object label,
                                           Object relatedObstacle,
                                           IlvPoint[] referencePoints,
                                           double lineWidth,
                                           double minPercentageFromStart,
                                           double maxPercentageFromStart,
                                           double maxDistFromPath,
                                           double preferredDistFromPath,
                                           int preferredSide,
                                           int allowedSide,
                                           int sideAssociation,
                                           double topOverlap,
                                           double bottomOverlap,
                                           double leftOverlap,
                                           double rightOverlap)
```
    Creates a new instance of a polyline label descriptor. This constructor exists for backward compatibility. See the other constructors for the details.
  - IlvAnnealingPolylineLabelDescriptor
```
public IlvAnnealingPolylineLabelDescriptor(Object lbl,
                                           Object relObstacle,
                                           IlvPoint[] refPoints,
                                           double linw,
                                           double minPercFromStart,
                                           double maxPercFromStart,
                                           double prefPercFromStart,
                                           double maxDist,
                                           double prefDist,
                                           int prefSide,
                                           int allowSide,
                                           int sideAssoc,
                                           double top,
                                           double bottom,
                                           double left,
                                           double right)
```
    Creates a new instance of a polyline label descriptor. This can be used to describe the movement of a label along a polyline. The label layout algorithm tries to place the label close, but not overlapping, to the polyline.
    It is possible to specify that only a partial area of the polyline should be used. This is done by specifying the start and end points of the area along the polyline by using the minimum and maximum percentage of the polyline length that should be used. If the entire polyline should be used, specify the minimum percentage 0 and the maximum percentage 100. If the label should be placed in the first third of the area close to the start point, set minPercentageFromStart to 0 and maxPercentageFromStart to 33.3. If the label should be placed in the last third of the area close to the end point, set minPercentageFromStart to 66.6 and maxPercentageFromStart to 100. If the label should be placed close to the middle of the polyline, set minPercentageFromStart to 33.3 and maxPercentageFromStart to 66.6. Additionally, you can specify a preference. For instance, if you set prefPercentageFromStart to 50, then the label will be placed near the middle of the polyline whenever possible. Normally the minimum and maximum percentages are strictly obeyed, while the preferred percentage is only a recommendation for the layout algorithm. The preferred percentage must be between the minimum and the maximum percentage.
    
    The label is placed no farther than maxDistFromPath away from the path. It is placed at the allowed side. Furthermore, the layout takes as a hint the distance and side where the label preferably should be placed. A label may partially overlap the related obstacle according to the specified overlap value.
    
    The meaning of the parameters allowedSide and preferredSide depends on the side association. Valid options for the side association are:
    - LOCAL - Sides are specified local to the flow direction of the polyline.
    - GLOBAL - Sides are specified relative to the global coordinates.
    If the side association is LOCAL, the following options can be used to specify the allowed and preferred sides:
    - IlvDirection.Left - left side in polyline flow direction.
    - IlvDirection.Right - right side in polyline flow direction.
    If the side association is GLOBAL, the following options can be used to specify the allowed and preferred sides:
    - IlvDirection.Left - left side.
    - IlvDirection.Right - right side.
    - IlvDirection.Top - top side.
    - IlvDirection.Bottom - bottom side.
    - IlvDirection.TopLeft - top side or left side.
    - IlvDirection.TopRight - top side or right side.
    - IlvDirection.BottomLeft - bottom side or left side.
    - IlvDirection.BottomRight - bottom side or right side.
    Normally the allowed side specification is strictly obeyed while the preferred side specification is only a recommendation for the layout algorithm. If multiple labels are placed at the same related obstacle, the allowed side is respected for all of them while usually only the first few labels can be placed at the preferred side of the related obstacle. In side association GLOBAL, it may happen that the allowed side specification is impossible. For instance, a strictly horizontal line has a top and a bottom side, but is not considered to have a left and right side. Therefore, to allow only the left or right side of this line cannot be obeyed.
    Parameters:
    
    lbl - The label.
    
    relObstacle - The obstacle that is related to the label, for example, when labeling roads of a geographic map, the related obstacle should be the object representing the road that has this label. The algorithm does not count overlaps between the label and its related obstacle. If the layout algorithm should count all overlaps to all labels, the related obstacle should be null.
    
    refPoints - The points that define the polyline the label should be close to. If no reference points are given, the points are retrieved from the related obstacle. In this case, the related obstacle must be a polyline obstacle in the labeling model.
    
    linw - The line width of the polyline. If -1 is given, the line width is retrieved from the related obstacle. In this case, the related obstacle must be a polyline obstacle in the labeling model.
    
    minPercFromStart - The start point of the area of the polyline that should be used, expressed as a percentage value relative to the length of the polyline.
    
    maxPercFromStart - The end point of the area of the polyline that should be used, expressed as a percentage value relative to the length of the polyline.
    
    prefPercFromStart - The preferred position of the label, expressed as a percentage value relative to the length of the polyline.
    
    maxDist - The maximum distance the label is allowed to be placed away from the path.
    
    prefDist - The preferred distance the label is placed away from the path.
    
    prefSide - The preferred side where the label should be placed.
    
    allowSide - The sides that are allowed for the label, or 0 if all sides are allowed.
    
    sideAssoc - The association for the preferred and allowed sides.
    
    top - The amount the label can overlap the related obstacle at the top side of the label.
    
    bottom - The amount the label can overlap the related obstacle at the bottom side of the label.
    
    left - The amount the label can overlap the related obstacle at the left side of the label.
    
    right - The amount the label can overlap the related obstacle at the right side of the label.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    IlvAnnealingLabelLayout.setLabelDescriptor(Object, IlvAnnealingLabelDescriptor), IlvLabelingModel.isPolylineObstacle(Object), LOCAL, GLOBAL
  - IlvAnnealingPolylineLabelDescriptor
```
public IlvAnnealingPolylineLabelDescriptor(IlvAnnealingPolylineLabelDescriptor d)
```
    Creates a copy of a label descriptor.
    
    Parameters:
    
    d - The original label descriptor.
    
    Since:
    
    JViews 8.5
  - IlvAnnealingPolylineLabelDescriptor
```
public IlvAnnealingPolylineLabelDescriptor(IlvInputStream stream)
                                    throws IOException,
                                           IlvReadFileException
```
    Creates a new IlvAnnealingPolylineLabelDescriptor from an IlvInputStream.
    
    Parameters:
    
    stream - The input stream from which the descriptor must be read.
    
    Throws:
    
    IlvReadFileException - if an error occurs while reading.
    
    IOException
- Method Detail
  - copy
```
public IlvAnnealingLabelDescriptor copy()
```
    Returns a copy of this label descriptor.
    
    Specified by:
    
    copy in class IlvAnnealingLabelDescriptor
    
    Returns:
    
    A copy of this label descriptor.
    
    Since:
    
    JViews 8.5
  - initialize
```
public void initialize(IlvLabelingModel labelingModel)
```
    Initializes the label descriptor before layout. You should not call this directly. It is called once at the beginning of layout.
    
    Specified by:
    
    initialize in class IlvAnnealingLabelDescriptor
    
    Parameters:
    
    labelingModel - The labeling model attached to the layout algorithm.
  - setPosition
```
public void setPosition(double pathLocation,
                        double distFromPath)
```
    Sets the label conceptually to the specified position. You should not call this directly.
    For experts: This method does not really move the label in the labeling model, but updates internal data structures that allow to test easily what would happen if the label would be at the input position. The real move of the label via IlvLabelingModel.moveLabel(Object, double, double, boolean) is delayed until the end of all tests.
    
    Specified by:
    
    setPosition in class IlvAnnealingLabelDescriptor
    
    Parameters:
    
    pathLocation - The location on the path.
    
    distFromPath - The distance from the location on the path.
    
    See Also:
    
    IlvAnnealingLabelDescriptor.updatePosition(double, double)
  - setTowardsPreferredPosition
```
public void setTowardsPreferredPosition(double pathLocation,
                                        double distFromPath,
                                        int i,
                                        int maxI)
```
    Sets the label to a position that is closer to the preferred position than the input position given by pathLocation and distFromPath.
    You should not call this directly. The layout algorithm calls this method iteratively to test various positions that are closer to the preferred position.
    
    Specified by:
    
    setTowardsPreferredPosition in class IlvAnnealingLabelDescriptor
    
    Parameters:
    
    pathLocation - The current location on the path.
    
    distFromPath - The current distance from the location on the path
    
    i - The number of the iteration step, from 0 to maxI - 1.
    
    maxI - The maximum number of iteration steps.
    
    See Also:
    
    setPosition(double, double), getPreferredPathLocation(), getPreferredDistFromPath()
  - getPreferredPathLocation
```
public double getPreferredPathLocation()
```
    Returns the preferred location on the path.
    
    Overrides:
    
    getPreferredPathLocation in class IlvAnnealingLabelDescriptor
  - considerObstacle
```
public boolean considerObstacle(Object obstacle)
```
    Returns true if the overlap between the label and the input obstacle should be considered during the quality calculation of the Simulated Annealing label layout algorithm. In fact, it returns false if the input obstacle is the related obstacle.
    
    Overrides:
    
    considerObstacle in class IlvAnnealingLabelDescriptor
    
    Parameters:
    
    obstacle - The obstacle to test.
    
    Returns:
    
    true if there is a penalty if the label overlaps the obstacle, and false, if there is no penalty.
  - getMinDist
```
protected double getMinDist(Object obstacle,
                            double min)
```
    Returns the minimum distance value between this label and the input obstacle. The input minimum distance is the global value. Specific labels may want to deviate from the global value and can override this method.
    
    Overrides:
    
    getMinDist in class IlvAnnealingLabelDescriptor
    
    Parameters:
    
    obstacle - The input obstacle.
    
    min - The input minimum distance.
    
    Returns:
    
    The minimum distance value between this label and the input obstacle.
  - setRelatedObstacle
```
public void setRelatedObstacle(Object obstacle)
```
    Sets the obstacle that is related to the label.
    
    Parameters:
    
    obstacle - The obstacle.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getRelatedObstacle(), setReferencePoints(IlvPoint[])
  - getRelatedObstacle
```
public final Object getRelatedObstacle()
```
    Returns the obstacle that is related to the label. It may return null if only an array of reference points was specified.
    
    Overrides:
    
    getRelatedObstacle in class IlvAnnealingLabelDescriptor
    
    See Also:
    
    setRelatedObstacle(Object)
  - setRelatedObstacleSource
```
public void setRelatedObstacleSource(Object source)
```
    Sets the source node if the related obstacle is a link.
    
    Parameters:
    
    source - The source node to set.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getRelatedObstacleSource()
  - getRelatedObstacleSource
```
public final Object getRelatedObstacleSource()
```
    Returns the source node if the related obstacle is a link.
    
    See Also:
    
    setRelatedObstacleSource(Object)
  - setRelatedObstacleTarget
```
public void setRelatedObstacleTarget(Object target)
```
    Sets the target node if the related obstacle is a link.
    
    Parameters:
    
    target - The target node to set.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getRelatedObstacleTarget()
  - getRelatedObstacleTarget
```
public final Object getRelatedObstacleTarget()
```
    Returns the target node if the related obstacle is a link.
    
    See Also:
    
    setRelatedObstacleTarget(Object)
  - setReferencePoints
```
public void setReferencePoints(IlvPoint[] points)
```
    Sets the reference points that define the polyline where the label must be placed. This should be used if there is no related obstacle, or if the related obstacle is not a polyline or a link. If you set the reference points to null, the shape of the related obstacle defines the where the label must be placed.
    Note that a copy of the input point array is stored. The original input point array can be reused afterwards.
    
    Parameters:
    
    points - The reference points defining the polyline, or null to use the label's related obstacle.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getReferencePoints(), setRelatedObstacle(Object)
  - getReferencePoints
```
public final IlvPoint[] getReferencePoints()
```
    Returns a copy of the specified reference points that define the polyline where the label must be placed. It returns null if no reference points were specified.
    
    See Also:
    
    setReferencePoints(IlvPoint[])
  - setLineWidth
```
public void setLineWidth(double lineWidth)
```
    Sets the line width of the polyline given by the reference points. If the line width is set to -1, the line width of the related obstacle is used.
    
    Parameters:
    
    lineWidth - The line width of the polyline, or -1 for the line width of the associated obstacle.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getLineWidth()
  - getLineWidth
```
public final double getLineWidth()
```
    Returns the specified line width of the polyline given by the reference points.
    
    See Also:
    
    setLineWidth(double)
  - setAnchor
```
public void setAnchor(int anchor)
```
    Sets the anchor of the label. Possible anchors are:
    - CENTER - The label is placed near the center of the polyline.
    - START - The label is placed closer to the start point of the polyline.
    - END - The label is placed closer to the end point of the polyline.
    - FREE - The label is placed anywhere at the polyline.
    Internally, the anchor specification is translated into a specification of the minimum, maximum, and preferred percentages from start.
    Parameters:
    
    anchor - The anchor of the label.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getAnchor(), setMinPercentageFromStart(double), setMaxPercentageFromStart(double), setPreferredPercentageFromStart(double)
  - getAnchor
```
public final int getAnchor()
```
    Returns the anchor of the label. Internally, the anchor specification is translated into a specification of the minimum, maximum, and preferred percentages from the start; therefore, in most situations it is more useful to query these percentages.
    
    See Also:
    
    setAnchor(int), getMinPercentageFromStart(), getMaxPercentageFromStart(), getPreferredPercentageFromStart()
  - setMinPercentageFromStart
```
public void setMinPercentageFromStart(double minPercentage)
```
    Sets the percentage relative to the length of the polyline that defines the start point of the area of the polyline that should be used for the label.
    The default value is 0.
    
    Parameters:
    
    minPercentage - The start point of the label area, expressed as a percentage relative to the length of the polyline.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getMinPercentageFromStart()
  - getMinPercentageFromStart
```
public final double getMinPercentageFromStart()
```
    Returns the percentage relative to the length of the polyline that defines the start point of the area of the polyline that should be used for the label.
    
    See Also:
    
    setMinPercentageFromStart(double)
  - setMaxPercentageFromStart
```
public void setMaxPercentageFromStart(double maxPercentage)
```
    Sets the percentage relative to the length of the polyline that defines the end point of the area of the polyline that should be used for the label.
    The default value is 100.
    
    Parameters:
    
    maxPercentage - The end point of the label area, expressed as a percentage relative to the length of the polyline.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getMaxPercentageFromStart()
  - getMaxPercentageFromStart
```
public final double getMaxPercentageFromStart()
```
    Returns the percentage relative to the length of the polyline that defines the end point of the area of the polyline that should be used for the label.
    
    See Also:
    
    setMaxPercentageFromStart(double)
  - setPreferredPercentageFromStart
```
public void setPreferredPercentageFromStart(double prefPercentage)
```
    Sets the percentage relative to the length of the polyline that defines the preferred position for the label. This percentage must be between the minimum and maximum percentages.
    The default value is 50.
    
    Parameters:
    
    prefPercentage - The preferred position for the label, which must be a value between the minimum and maximum percentages.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getPreferredPercentageFromStart(), setMinPercentageFromStart(double), setMaxPercentageFromStart(double)
  - getPreferredPercentageFromStart
```
public final double getPreferredPercentageFromStart()
```
    Returns the percentage relative to the length of the polyline that defines the preferred position for the label.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    setPreferredPercentageFromStart(double)
  - setTopOverlap
```
public void setTopOverlap(double overlap)
```
    Sets the amount the label can overlap the related obstacle or reference polyline at the top side of the label.
    The default value is 0.
    
    Parameters:
    
    overlap - The allowable amount of overlap at the top side of the label.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getTopOverlap()
  - getTopOverlap
```
public final double getTopOverlap()
```
    Returns the amount the label can overlap the related obstacle or reference polyline at the top side of the label.
    
    See Also:
    
    setTopOverlap(double)
  - setBottomOverlap
```
public void setBottomOverlap(double overlap)
```
    Sets the amount the label can overlap the related obstacle or reference polyline at the bottom side of the label.
    The default value is 0.
    
    Parameters:
    
    overlap - The allowable amount of overlap at the bottom side of the label.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getBottomOverlap()
  - getBottomOverlap
```
public final double getBottomOverlap()
```
    Returns the amount the label can overlap the related obstacle or reference polyline at the bottom side of the label.
    
    See Also:
    
    setBottomOverlap(double)
  - setLeftOverlap
```
public void setLeftOverlap(double overlap)
```
    Sets the amount the label can overlap the related obstacle or reference polyline at the left side of the label.
    The default value is 0.
    
    Parameters:
    
    overlap - The allowable amount of overlap at the left side of the label.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getLeftOverlap()
  - getLeftOverlap
```
public final double getLeftOverlap()
```
    Returns the amount the label can overlap the related obstacle or reference polyline at the left side of the label.
    
    See Also:
    
    setLeftOverlap(double)
  - setRightOverlap
```
public void setRightOverlap(double overlap)
```
    Sets the amount the label can overlap the related obstacle or reference polyline at the right side of the label.
    The default value is 0.
    
    Parameters:
    
    overlap - The allowable amount of overlap at the right side of the label.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getRightOverlap()
  - getRightOverlap
```
public final double getRightOverlap()
```
    Returns the amount the label can overlap the related obstacle or reference polyline at the right side of the label.
    
    See Also:
    
    setRightOverlap(double)
  - setPreferredSide
```
public void setPreferredSide(int side)
```
    Sets the preferred side where the label is placed. The meaning depends on the side association. If the side association is LOCAL, the following options can be used to specify the preferred side:
    - IlvDirection.Left - left side in polyline flow direction.
    - IlvDirection.Right - right side in polyline flow direction.
    If the side association is GLOBAL, the following options can be used to specify the preferred side:
    - IlvDirection.Left - left side.
    - IlvDirection.Right - right side.
    - IlvDirection.Top - top side.
    - IlvDirection.Bottom - bottom side.
    - IlvDirection.TopLeft - top side or left side.
    - IlvDirection.TopRight - top side or right side.
    - IlvDirection.BottomLeft - bottom side or left side.
    - IlvDirection.BottomRight - bottom side or right side.
    The default value is IlvDirection.Left.
    The preferred side is only a recommendation for the layout and is not always strictly obeyed. In particular, if multiple labels are placed at the same related obstacle, only the first few labels can be placed at the preferred side of the obstacle.
    Parameters:
    
    side - The preferred side of label placement.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getPreferredSide(), setSideAssociation(int)
  - getPreferredSide
```
public final int getPreferredSide()
```
    Returns the preferred side where the label is placed. The possible return values are defined in IlvDirection.
    
    See Also:
    
    setPreferredSide(int)
  - setAllowedSide
```
public void setAllowedSide(int side)
```
    Sets the allowed side where the label is placed. The meaning depends on the side association. If the side association is LOCAL, the following options can be used to specify the allowed side:
    - IlvDirection.Left - left side in polyline flow direction.
    - IlvDirection.Right - right side in polyline flow direction.
    - 0 - both sides.
    If the side association is GLOBAL, the following options can be used to specify the allowed side:
    - IlvDirection.Left - left side.
    - IlvDirection.Right - right side.
    - IlvDirection.Top - top side.
    - IlvDirection.Bottom - bottom side.
    - IlvDirection.TopLeft - top side or left side.
    - IlvDirection.TopRight - top side or right side.
    - IlvDirection.BottomLeft - bottom side or left side.
    - IlvDirection.BottomRight - bottom side or right side.
    - 0 - all sides.
    The default value is 0.
    Normally the allowed side specification is strictly obeyed. In side association GLOBAL, it may happen that the allowed side specification is impossible. For instance, a strictly horizontal line has a top and a bottom side, but is not considered to have a left and right side. Therefore, to allow only the left or right side of this line cannot be obeyed.
    Parameters:
    
    side - The allowed side specification for label placement.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getAllowedSide(), setSideAssociation(int)
  - getAllowedSide
```
public final int getAllowedSide()
```
    Returns the allowed side where the label is placed. The possible return values are defined in IlvDirection.
    
    See Also:
    
    setAllowedSide(int)
  - setSideAssociation
```
public void setSideAssociation(int association)
```
    Sets the side association of the label. This defines the meaning of the preferred and allowed sides. Possible side associations are:
    - LOCAL
    - GLOBAL
    The default value is LOCAL.
    Parameters:
    
    association - The side association of the label.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    setAllowedSide(int), setPreferredSide(int), getSideAssociation()
  - getSideAssociation
```
public final int getSideAssociation()
```
    Returns the side association of the label.
    
    See Also:
    
    setSideAssociation(int)
  - setPreferredDistFromPath
```
public void setPreferredDistFromPath(double distance)
```
    Sets the preferred distance from the location on the path. It must be smaller than the maximum distance from path.
    The default value is 0.
    
    Parameters:
    
    distance - The preferred distance from the path.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getPreferredDistFromPath(), setMaxDistFromPath(double)
  - getPreferredDistFromPath
```
public final double getPreferredDistFromPath()
```
    Returns the preferred distance from the location on the path.
    
    Overrides:
    
    getPreferredDistFromPath in class IlvAnnealingLabelDescriptor
    
    See Also:
    
    setPreferredDistFromPath(double)
  - setMaxDistFromPath
```
public void setMaxDistFromPath(double distance)
```
    Sets the maximum distance from the location on the path.
    The default value is 0.
    
    Overrides:
    
    setMaxDistFromPath in class IlvAnnealingLabelDescriptor
    
    Parameters:
    
    distance - The maximum distance from the path.
    
    Since:
    
    JViews 5.5
    
    See Also:
    
    getMaxDistFromPath()
  - getMaxDistFromPath
```
public final double getMaxDistFromPath()
```
    Returns the maximum distance from the location on the path.
    
    Overrides:
    
    getMaxDistFromPath in class IlvAnnealingLabelDescriptor
    
    See Also:
    
    setMaxDistFromPath(double)
  - write
```
public void write(IlvOutputStream stream)
           throws IOException
```
    Writes the label descriptor to the output stream. It writes the related obstacle only if it is of type IlvGraphic.
    
    Specified by:
    
    write in interface IlvPersistentObject
    
    Parameters:
    
    stream - The output stream.
    
    Throws:
    
    IOException - standard IO error.

Class IlvAnnealingPolylineLabelDescriptor

Field Summary

Fields inherited from class ilog.views.graphlayout.labellayout.annealing.IlvAnnealingLabelDescriptor

Constructor Summary

Method Summary

Methods inherited from class ilog.views.graphlayout.labellayout.annealing.IlvAnnealingLabelDescriptor

Methods inherited from class java.lang.Object

Field Detail

LOCAL

GLOBAL

CENTER

START

END

FREE

Constructor Detail

IlvAnnealingPolylineLabelDescriptor

IlvAnnealingPolylineLabelDescriptor

IlvAnnealingPolylineLabelDescriptor

IlvAnnealingPolylineLabelDescriptor

IlvAnnealingPolylineLabelDescriptor

IlvAnnealingPolylineLabelDescriptor

IlvAnnealingPolylineLabelDescriptor

IlvAnnealingPolylineLabelDescriptor

Method Detail

copy

initialize

setPosition

setTowardsPreferredPosition

getPreferredPathLocation

considerObstacle

getMinDist

setRelatedObstacle

getRelatedObstacle

setRelatedObstacleSource

getRelatedObstacleSource

setRelatedObstacleTarget

getRelatedObstacleTarget

setReferencePoints

getReferencePoints

setLineWidth

getLineWidth

setAnchor

getAnchor

setMinPercentageFromStart

getMinPercentageFromStart

setMaxPercentageFromStart

getMaxPercentageFromStart

setPreferredPercentageFromStart

getPreferredPercentageFromStart

setTopOverlap

getTopOverlap

setBottomOverlap

getBottomOverlap

setLeftOverlap

getLeftOverlap

setRightOverlap

getRightOverlap

setPreferredSide

getPreferredSide

setAllowedSide

getAllowedSide

setSideAssociation

getSideAssociation

setPreferredDistFromPath

getPreferredDistFromPath

setMaxDistFromPath

getMaxDistFromPath

write